User manual

MADRIX Help and Manual363
© 2011 inoage GmbH
"Display Area" specifies what is shown in the DVI window. Activate "Full Size" and your full
matrix will be displayed. Or you can select a certain cut-out and specify which details of your
matrix will be shown. You can choose the start coordinates and the end coordinates of this area.
"Left:" and "Top:" define the start coordinates in a coordinate system that starts with 0,0 in the
top left corner. "Right:" and "Bottom:" define the end coordinates. The end coordinates cannot
be higher than the full size of the matrix. For example, for a matrix with 50x50 pixels, the maximum
value of "Right:" and "Bottom:" is 50.
The standard configuration includes an activated "Full Size".
Please press "Apply" to activate the changes you have made.
You can use "Display Rotation" in the following way: Select "DVI" first, change the settings,
and then switch back to "Fullscreen".
Lock Position
You can lock this window at a particular position. Right-click and choose "Lock Position" from the
context menu.
Always On Top
If you want the window to be in the front of all windows at all times, activate the entry "Always
On Top".
Use Background Image...
If you want to replace the grey background color, you can replace it with an image. Click "Use
Background Image..." and open the file.
DVI, Window, Fullscreen
"DVI" activates the borderless DVI Window. "Window" activates the framed DVI window.
"Fullscreen" activates DVI output in fullscreen mode.
Flip Vertically & Flip Horizontally
"Flip Vertically" and "Flip Horizontally" will flip the output accordingly. It turns over the image.
Close