User manual

OUTPUT 370

7.4 e:net From e:cue

Enable e:net

For the administration of e:net in MADRIX, please enable the network driver first. Go to the menu

"Preferences" -> "Options" or the press the keys "Ctrl-Alt-O". Select the tab "Devices

(Network)".

Here you can enable and disable the e:net network driver.

Use the drop-down list to select the correct network.

Please always make sure that you have selected the correct network. Otherwise, the

network device might still be found. But no data can be sent.

Please note: The standard butler interface has a predefined IP address (192.168.123.x) and

subnet mask (255.255.255.0).

Use the edit field "Time To Detect Devices (s)" to define how long MADRIX searches the

network for e:cue devices (type in a value in seconds).

We recommend to utilize at least a value of 3 to allow for a sufficient search.

Higher values are recommended for larger installations.