User manual

MADRIX Help and Manual381

Please always make sure that you have selected the correct network. Otherwise, the

network device might still be found. But no data can be sent.

In the next step, open the "Device Manager" (press "F4" or open the menu "Preferences" ->

"Device Manager").

Go to the tab "DMX Devices" and decide which of the listed devices are used as output devices.

If you click on "Enable" and "Output", the data will be sent to this device. Check also if every

device is assigned a different universe (right hand side of the window).

Please check if the DMX universes are assigned correctly!