User manual

OUTPUT 388

We recommend to utilize at least a value of 10 to allow for a sufficient search.

Higher values are recommended for larger installations.

In the next step, open the "Device Manager" (press "F4" or open the menu "Preferences" ->

"Device Manager").

Go to the tab "DMX Devices" and decide which of the listed devices are used as output devices.

If you click on "Enable" and "Output", the data will be sent to this device. Check also if every

device is assigned a different universe (right hand side of the window).

Please check if the DMX universes are assigned correctly!

There is a difference between KiNet V1 and V2. KiNet V2 makes sure that the panels will receive

the data at the same time. This is particularly useful for large installations. Please see the Color

Kinetics documentation to see which protocol is supported by your power supply.

A green dot indicates that all devices are enabled and working.