User manual

MADRIX Help and Manual393

Regarding the configuration and addressing of Philips Color Kinetics lighting fixtures and power

supplies, the company offers extensive information on the following website: http://www.

colorkinetics.com/support/addressing/

In addition, there is a software tool called QuickPlay Pro for configuration and multiple addressing.

Here is an excerpt from the website:

"With QuickPlay Pro, you can:

Use serial numbers to program fixtures with light numbers or DMX addresses

Assign base light numbers to power / data supplies, allowing automatic fixture configuration

Test light numbers and DMX channels

Demonstrate a lighting system using four built-in light shows: fixed color, color wash, rainbow,

and streak"

For example, the tool can be used to change the IP addresses of Color Kinetics lighting fixtures.

Please note: Working with such a tool is only recommended for advanced users because settings

can easily be adjusted wrong!

You can download the tool on the website mentioned above or at http://www.colorkinetics.com/

support/downloads/

The download archive for older products can be found at http://www.colorkinetics.com/support/

downloads/archive/

Information About PDS-60ca Power Supplies

The PDS-60ca is a well-known and often used power/data supply from Philips Color Kinetics. Three

different versions are offered:

PDS-60ca PREPROGRAMMED

PDS-60ca DMX

PDS-60ca ETHERNET

You can identify your version of the device using the following item numbers written on the case

of the PDS-60ca:

109-000016-00 (Pre-programmed)

109-000016-01 (DMX)

109-000016-02 (Ethernet)