User manual

OUTPUT 402

Important Notes

Please switch off your Firewall under Windows Vista and Windows 7 or configure your

Firewall accordingly. sACN might not work with a Firewall!

sACN streams data to all network cards of the computer in broadcast mode. You

cannot select a single, specific network card.

It is recommended to run sACN in a separate network without internet access. Else,

the internet connection may not work properly.

Please keep in mind that network devices, if activated, cause network traffic!

Further Configuration

Please remember to configure your light matrix in the Matrix Generator or Patch.

Please make sure to save your MADRIX Setup after the configuration process.

7.9 Proprietary DVI Devices

Overview

Certain DVI hardware is equipped with proprietary protocols. MADRIX has implemented a range of

products that are natively supported because of this.

MADRIX currently supports the following DVI device types:

EuroLite T9

ColourSmart Link