User manual

OUTPUT 406

Now, the new DVI device will appear in the list:

There are different "Settings" available for further configuration. Always press "Apply" to accept

the changes you have made.

"Enable" activates or deactivates the currently selected DVI device. This is activated by default.

It should be activated in order to work correctly.

Activate "Enable Full Size" and your full matrix will be displayed. This is activated by default.

Or you can select a certain cut-out and specify which details of your matrix will be shown. You

can choose the start coordinates and the end coordinates of this area. "Left" and "Top" define

the start coordinates in a coordinate system that starts with 0,0 in the top left corner. "Right"

and "Bottom" define the end coordinates.

Scaling is not available.

Your matrix will not be stretched or compressed in order to fit the DVI device or vice versa.