User manual

MADRIX Help and Manual417
© 2011 inoage GmbH
Mapping
Activate "Mapping" (in the upper right corner) if you would like to route incoming DMX signals
through MADRIX for output (DMX through). This feature maps incoming data to the specified DMX
universe and channels.
Define which minimum DMX channel and which maximum DMX channel should be mapped to
which DMX universe ("Map Channels From ... To ... To Universe ..."). You can also define a
start channel ("Start At Channel"), which defines the first channel to start with.
The option "Use HTP" can be activated if MADRIX should only use the highest values it receives
on a particular channel (Highest Takes Precedence principle).
Press "Apply" after the configuration process.
Art-Net Remote
Overview
An Art-Net device can be used for DMX-IN as well. In general, this feature is called Art-Net
Remote.