User manual

INPUT & Remote Control 418

1. Art-Net Configuration

Please set up your network card using the following Art-Net address area:

2.0.0.1 ... 2.255.255.254 or

10.0.0.1 ... 10.255.255.254

Artistic Licence, the creators of Art-Net, recommends to primarily use the first address range. The

second is regarded to be an alternative.

Please use the following Subnet mask:

255.0.0.0

You must use this address area. Otherwise Art-Net may not work.

2. Activating Art-Net

Go to the menu "Preferences", select "Device Manager" and then select the tab "Art-Net".

Enable Art-Net here by activating the check-box in the upper left corner.

If you have enabled Art-Net inside this dialog, you will see at least one entry. The "Art-Net

Remote" entry is automatically provided by MADRIX and you can use it for controlling MADRIX

remotely within the Art-Net network (Art-Net Remote).