User manual

INPUT & Remote Control 454

Configuration - Audio

Please make sure that your MIDI device is activated as described above.

Select your MIDI device in the list, and click "Audio".

This activates incoming MIDI signals for sound effects. Now, the "Audio" section becomes

available:

"Use For S2L" and "Use For M2L" activates the audio analysis of MIDI signals for Sound2Light

and Music2Light effects, respectively. They are activated by default.

The section "Channel Filter" allows you to select which MIDI channel will be scanned by MADRIX.

In general, MIDI offers 16 channels. You can configure each MIDI device to send on a particular

channel. Make sure that this channel is also selected in this section here. If you wish to filter a

channel, deselect the according number. As a result, the channel will not be used for MIDI-IN in

combination with MADRIX. By default, all 16 channels are activated and will be scanned by

MADRIX.