User manual

INPUT & Remote Control 524

Setting Up the Cue List to Receive MTC

In the second step, set up your Cue List. (Learn more about the Cue List.)

First, activate the switch "External" and select a frame rate. In this example we have used 25

FPS (standard rate for PAL video).

Now, add an entry to the Cue List. The next step is to set the "Time Code" for a Cue List entry.

The format for the Time Code is HH:MM:SS:FF, meaning hours:minutes:seconds:frames.

You can use the following values for the Time Code:

For an input of one hour you can use 01000000, 01:00:00:00, 01,00,00,00, 01.00.00.00

, 01/00/00/00, 1h, or 01h00m00s00f.

For an input of ten minutes you can use 00100000, 00:10:00:00, 00,10,00,00,

00.10.00.00, 00/10/00/00, 10m, or 00h10m00s00f.

For an input of ten seconds you can use 00001000, 00:00:10:00, 00,00,10,00,

00.00.10.00, 00/00/10/00, 10s, or 00h00m10s00f.

For an input of ten frames you can use 00000010, 00:00:00:10, 00,00,00,10,

00.00.00.10, 00/00/00/10, 10f, or 00h00m00s10f.

A value of -1 or using the space bar resets the fields to their default value.

Add or edit more entries according to your requirements.