User manual

Recording 542

"Frame Time (ms)" defines the frame rate of the record. Please adjust the setting to the

requirements of your LED fixtures! A frame rate (FPS) that is too high might cause visual

problems.

Creating A Record File

Please make sure to configure all available options before recording (see above).

Step 1)

Begin recording by pressing "Start". MADRIX will start to record the Main Output.

Please note: During your record you can change Storage Places, use the cross-fader, use the

Master Fader, etc. in order to customize your record.

Step 2)

Various information will be displayed.

The Time is displayed in HH:MM:SS:FF (Hours:Minutes:Seconds:Frames).