User manual

MADRIX PLEXUS 582
© 2011 inoage GmbH
Re-scans already connected devices and brings the information in the list up to
date.
Enables remote access. You can easily connect to your devices using a web
browser. In the browser you will be able to control your device remotely via a graphical interface
that represents the menu of your PLEXUS. First, select your PLEXUS in the list. Then, press "Call"
.
Synchronizes the internal clock of the PLEXUS with the clock of your computer.
The computer clock will define the time that is used. First, select your PLEXUS devices in the list.
The, press "Sync Time".
Upgrades the firmware of your MADRIX PLEXUS. Firmware upgrades are
implemented directly into the MADRIX Software. To upgrade, please connect the PLEXUS via
USB to your computer. Then, select your interface in the list and press "Firmware". It is
recommend to always use the latest firmware.
Downloads a saved PLEXUS Configuration directly from a connected PLEXUS to
your hard disk. You can use this feature to create backups, for example.
In addition, please edit the following columns according to your requirements.
(Perform a double-click to change their values. Use Enter to apply your changes. Use Escape to
cancel.)