User manual

MADRIX Help and Manual591

In the WYSIWYG device configuration page you can enable or disable the DMX-Output, rename

the device using a custom name, and set the start and the end universe for the DMX data that

will be send to WYSIWYG. The "IP" and "Port" fields represent the IP address and the port

number of the target computer, on which WYSIWYG is running. So, if the device was detected

automatically, you do not need to change it.

Please note: You can only enable DMX output if the WYSIWYG Driver "State" is "online" .

In other words, the WYSIWYG driver must be up and running on the same computer or in the

network.

Now if the connection is established, a message will be display that reads "xx MADRIX device(s)

connected" in the status area of the WYSIWYG device configuration page.

Please note that WYSIWYG can connect up to 20 computers running MADRIX and vice

versa.

You can save your device settings in *.vdf file format to retrieve it later. To save your current

configurations, click on the save button in the lower left corner of the Visualizer dialog and

choose a name and path.