User manual

Graphical User Interface (GUI) 64

Essentially, a color-fade in MADRIX does imitate a black-fade (see above). Effect

A is dimmed to 0% first and afterwards effect B increases linearly from 0% to 100%.

But on top of that, a color is added. While effect A is reduced in intensity, the color C gains

intensity. In the middle of the fade effect A and effect B stand at 0%, but color C stands at

100%. When effect B reaches 100%, color C is reduced to 0% again.

In the middle position you will not see effect A or B, but only the color you picked. The

"FaderBox" button or the Color Picker enable you to choose the color for the color-fade.