User manual

MADRIX Help and Manual65
© 2011 inoage GmbH
Color Filter
You can also choose to activate a Color Filter. Such a filter filters the colors
used in the effects of Storage Area A or B. Simply select the color using the Color Picker or the
Color FaderBox in the upper right corner of the Fade Area, and a color filter is activated. The color
"white" is the default setting and means that no filter is active.
The color filter works in multiply mode. That means that the colors of the effects are multiplied
with the colors of the filter (Effect x Color Filter). Both, effect and filter, are represented through
RGB or RGBW mode (RGB(W) x RGB(W). Moreover, every single color of the effect will be multiplied
with the corresponding color of the filter (R x R, G x G, B x B, W x W). You will see the relation in
the following table.
Effect
x
C olor Filter
The colors of the effects are multiplied with the
colors of the filter.
results in
RGB(W)
x
RGB(W)
Effect and filter are represented through RGB or
RGBW mode.
results in
R
G
B
(W)
x
x
x
x
R
G
B
(W)
Every single color of the effect will be multiplied with
the corresponding color of the filter.
Example 1 in RGB Mode
SC E C olor
x
C olor Filter
=
Result
Yellow
255
255
0
x
x
x
Green
0
255
0
=
=
=
Green
0
255
0
Example 2 in RGB Mode
SC E C olor
x
C olor Filter
=
Result
Red
255
0
0
x
x
x
Green
0
255
0
=
=
=
Blac k
0
0
0
Example 3 in RGB Mode
SC E C olor
x
C olor Filter
=
Result
Turquois e
P ink
Blue