User manual

MADRIX Help and Manual85

Count X, Count Y

More importantly, you need to define the number of LED fixtures that

are installed in your set-up. "X" sets the quantity of horizontally mounted fixtures, while "Y" sets

the number of lighting fixtures with vertical alignment. Both values make up the whole matrix. In

our example you will get a matrix with 100 pixels (10x10 pixels).

Please pay attention to how your fixture is patched. Some fixtures are already implemented with

their specific number of pixels, for example 32x48 pixels.

Please enter the number of fixtures you are using and not the total number of pixels.

"Merge Fixtures" becomes available when using the protocol type "DVI".

Deactivate the option if you wish to create an individual DVI Patch.

When using DVI or related protocols, please pay attention to the maximum number of supported

DVI pixels according to your MADRIX version and according to the performance of your PC.

When using DMX or related protocols, please pay attention to the maximum number of DMX

channels according to your MADRIX version and according to the performance of your PC.

DMX Start Corner

With the help of the "DMX Start Corner" it is possible to specify

where DMX addressing starts.