User manual

MADRIX Help and Manual95
© 2011 inoage GmbH
"Invert Selection" (or "Ctrl+I") will select every fixture except the ones you have currently
selected.
Preferences Menu
"Highlight Selected Fixtures" will make corresponding fixtures flash for a better identification.
This makes it easier to see them on stage.
"Allow Overlapping" allows fixtures as well as DVI Maps to be arranged on top of each other in
the virtual matrix. If overlapping is allowed, fixtures or DVI Maps will be placed on top of existing
fixtures or DVI Maps in the Patch. If it is deactivated, you cannot place any fixture or DVI Map to
a position that is occupied by another fixture or DVI Map in the Patch.
"Link DVI Maps And Fixtures" (or "Ctrl+L") is only relevant for the DVI Patch. It links DVI fixtures
and their corresponding DVI Maps together when applying a transformation (position, rotation, or
flipping).
"Copy DVI Maps With Fixtures" is only relevant for the DVI Patch. It allows you to copy
corresponding DVI Maps along with their DVI fixtures without resetting the settings of the DVI
Maps.
"Auto Address Copied DMX Fixtures" enables auto addressing for DMX fixtures only. Auto
addressing is explained below.
"Options..." (or "Ctrl+Alt+O") will call up the options dialog of the Patch.
View Menu