PLEXUS USB 2.
English MADRIX® PLEXUS – Quick Start Guide 2nd Edition, Last Update: July 2012 Thank You For Purchasing MADRIX® PLEXUS Please read this guide carefully and thoroughly before using the MADRIX® PLEXUS. Make sure that you fully understand all information. This MADRIX® PLEXUS Quick Start Guide and the MADRIX® PLEXUS User Manual are available in English and German. The MADRIX® software and its user manuals are available in English.
Copyright Information And Disclaimer © 2012 inoage GmbH. All rights reserved. Information is subject to change at any time and without prior notice. Errors and omissions excepted. Reproduction, adaptation, or translation without prior written permission is prohibited. inoage GmbH does not grant guarantee on validity for a particular reason, the marketability, or other properties of the product. There is no way to assert a claim to inoage GmbH, neither in the legal way nor in other ways.
Safety Instructions And Limited Warranty Please follow the instructions below to avoid mishandling, damage to the device, or personal injury: ▴ WARNING! HANDLE WITH CAUTION! THE POWER SUPPLY / THE DEVICE WORKS WITH MAINS VOLTAGE (100V – 240V). ▴ ▴ ▴ OK Beware that the interface works with electrical power. Only use the device in dry environments (indoor use). The IP Rating of the device ! is 20. Do not use the interface in humid environments and avoid contact with water or any other liquids.
End-Of-Life This electrical device and its accessories need to be disposed of properly. Do not throw the device into normal trash or household waste. Please recycle packaging material whenever possible. Usage In general, this device is designed to be operated as a hardware control interface to be connected towards various types of controllable lights / lighting controllers via DMX512 (USB-to-DMX) or Art-Net (DMX-over-Ethernet). Do not use the interface for any other, deviant purpose.
Power Supply Important: Pay attention to all individual warnings and instructions given in this quick start guide! How To Open The Metal Lid The MADRIX® PLEXUS is equipped with a metal lid at the top. It covers the SD card slot, the extension port, and the Kensington Security Slot. Opening The Lid Step 1) Hold the PLEXUS at the left and right side with both hands. You should face the display. Place your thumbs near the display.
Connectivity Bottom Connections DMX 1 DMX 2 Top Connections USB/Power Ethernet Push to Eject SD Extension 1 2 3 4 5 6 7 8 9 10 7) Status LED for SD card slot 8) SD card slot 9) Kensington Security Slot 10) Extension port 1) XLR port, DMX 1 2) XLR port, DMX 2 3) Status LED for USB/Power 4) USB/Power port 5) Status LED for Ethernet 6) RJ45 Ethernet port 3-Pin And 5-Pin XLR Connector Layout The images below outline the general pin layout of 5-pin and 3-pin XLR ports.
SD Cards Please note: The package of the PLEXUS includes one SD card with 2GB capacity. The SD card is already inserted into the SD card slot when shipped. Inserting The SD Card Hold the SD card as shown on the device! The canted edge must point to the status LED and the pins must face towards the display. Now, carefully push the SD card into the SD card slot until it clicks and snaps into its position.
Icons An SD card is inserted into the device. No SD card is inserted into the device. The values in the menu are editable. You can change the settings. Freeze is activated. The icon is blinking. Important PLEXUS Menus Status Outgoing and Incoming Data Playback Language IP Address 8 Navigate to the menu ‘Info’ à ‘Status’. The name of the device, its IP address, the time and date, the status, and the status of the bottom connections are displayed.
Description Of Status LED Codes English The following tables describe the status codes of the three status LEDs. COLOR Powered off Light green Blinking green Fading between green + red Orange STATUS LED USB/POWER USB/Power not connected. The device has no power. Connected to the external power supply. The power is on. Communicating over USB; Sending or receiving data over USB; The power is on. The interface works correctly. Connected to USB; Drivers installed correctly; The power is on.
Using The MADRIX® Software MADRIX® is a professional and advanced LED lighting control software. The PLEXUS already includes the software license for 1024 DMX channels. The data output (the license) is automatically activated when you connect the PLEXUS to a computer that has the MADRIX® software installed and the USB and/or Ethernet drivers enabled in MADRIX®. You can use MADRIX® for the PLEXUS Live Mode, to create PLEXUS Configurations and Stand-Alone Shows, or to configure your device further.
Installing The MADRIX® Software And Drivers DO NOT CONNECT THE MADRIX® PLEXUS TO YOUR COMPUTER BEFORE INSTALLING THE MADRIX® SOFTWARE. Please click ‘Next’ to start the installation. You may abort the process at any time by clicking ‘Cancel’. The ‘License Agreement’ will appear. It outlines the terms you are agreeing to when you install the software. You must accept these terms in order to continue. Please click ‘I Agree’.
The next window offers the chance to select which components and which drivers you want to install. A description is given for each item. Please make sure to select ‘MADRIX’ and ‘Interface Driver’, which are the most important components for operating the MADRIX® PLEXUS. Please click ‘Next’. The next section called ‘Destination Folder’ allows you to select the location on your harddisk where the software will be installed. Please choose a location and then click ‘Install’.
Manually Installing The PLEXUS Driver In Windows Vista or Windows 7, click ‘Start’ à ‘Control Panel’ à ‘System and Security’ (or just ‘System’) à ‘Device Manager’. Right-click on ‘MADRIX PLEXUS’ in the section ‘Other devices’ and choose ‘Update Driver Software…’. Then, navigate to the driver location on your harddisk: ‘C:\Program Files (x86)\MADRIX\madrixusbdriver\plexus\windows’ In Windows XP, click ‘Start’ à ‘Settings’ à ‘Control Panel’ à ‘Systems’ à tab ‘Hardware’ à ‘Device Manager’.
Live Mode You can use this interface as a live controller to send DMX data via MADRIX®. You can either use 2x DMX-OUT, or 2x DMX-IN, or 1x DMX-OUT as well as 1x DMX-IN, or Art-Net in Live Mode. Please make sure to install the MADRIX® software first. Afterwards, please connect the PLEXUS directly to a free USB 2.0 port of your computer or use the USB power supply (or USB 2.0) and the network connection for Art-Net.
Stand-Alone Mode Several steps are required to create a Stand-Alone Show for your device. 1) Please configure your virtual matrix according to your LED installation. In MADRIX®, navigate to the menu ‘Preferences’ à ‘Matrix Generator’ or ‘Preferences’ à ‘Patch’ for this task. 2) Create the effects you wish to use with the help of the graphical user interface (GUI) of the software MADRIX®. 3) Navigate to the menu ‘Window’ à ‘Cue List’ in MADRIX® if you wish to create a playlist.
Extension Port – Remote Control The MADRIX® PLEXUS features a 9 10 11 12 13 14 15 15-pin serial connector with 1 2 3 4 5 6 7 8 individually addressable ports. The extension port makes it possible to Extension connect external analog or digital devices for remote control. In MADRIX®, please open the menu ‘Preferences’ à ‘PLEXUS Configuration…’ à ‘Extension Ports’ to configure each port individually for the corresponding PLEXUS Configuration.
Control Buttons You may skip to the next Scene or go back to the last Scene by manually using the ‘left’ and the ‘right’ button on the device. Pause playback by using the ‘down’ button and continue playback by pressing ‘down’ for the second time. Stop playback entirely by using ‘up’. Start playback again by pressing ‘down’. Managing Devices Further You can further manage and set up your device. In MADRIX®, please open the menu ‘Tools’ à ‘PLEXUS Configuration…’.
Frequently Asked Questions (FAQs) Do I need a MADRIX® PLEXUS and a MADRIX® KEY? No. The MADRIX® software license for up to 1024 DMX channels data output is already included. The MADRIX® KEY is not necessary for operating the MADRIX® PLEXUS. However, you may connect both to your computer to use their output features together. Is it possible to use more than one MADRIX® PLEXUS? Yes. Multiple devices can be used together to control larger LED projects. Can I upgrade the PLEXUS software license? No.
MADRIX® PLEXUS – Kurzanleitung 2. Edition, Stand: Juli 2012 Deutsch Vielen Dank, dass Sie sich für das MADRIX® PLEXUS entschieden haben! Bitte lesen Sie sich diese Kurzanleitung aufmerksam und sorgfältig vor der Erstbenutzung durch. Vergewissern Sie sich, dass Sie alle Informationen verstanden haben. Diese Kurzanleitung und das weiterführende MADRIX® PLEXUS Handbuch liegen in englischer und deutscher Sprache vor. Die Software MADRIX® und dazugehörige Handbücher liegen in englischer Sprache vor.
Urheberrecht und Haftungsausschluss © 2012 inoage GmbH. Alle Rechte vorbehalten. Änderungen und Irrtümer vorbehalten. Reproduktion, Adaption oder Übersetzungen sind ohne vorherige, schriftliche Erlaubnis nicht gestattet. Dieses Handbuch wurde mit größter Sorgfalt verfasst. inoage GmbH gibt jedoch keine Gewähr hinsichtlich Richtigkeit, Marktfähigkeit oder Eigenschaften des Produkts. Es gibt keinen rechtlichen oder anderen Weg, Anspruch gegenüber inoage GmbH zu erheben.
Sicherheitshinweise und Garantie Bitte beachten Sie die nachstehenden Hinweise, um falsche Handhabung, gesundheitliche Schäden oder Geräteschäden zu vermeiden: ▴ ACHTUNG, GEFAHR! DAS NETZTEIL / DAS GERÄT ARBEITET MIT NETZSPANNUNG (100V – 240V). ▴ ▴ ▴ OK Betreiben Sie das Gerät nur in trockener Umgebung (Gebrauch in geschlossenen Räumen). Die Schutzklasse des Gerätes ist IP20. ! Vermeiden Sie hohe Luftfeuchtigkeit und Kontakt mit Wasser und jeglichen anderen Flüssigkeiten.
Altgeräte und Entsorgung Das Gerät, sein Zubehör sowie Verpackungsmaterial müssen ordnungsgemäß entsorgt werden. Geben Sie nichts in den Hausmüll. inoage ist beim bundesweiten Rücknahmesystem für Elektronische Geräte (EAR) registriert (WEEE-Reg.-Nr. DE 2669521). Benutzung Das Gerät ist als Steuerungsgerät konzipiert und wird als Interface an verschiedene, steuerbare Leuchtprodukte/Controller mit Hilfe von DMX512 (USB-zu-DMX512) bzw. Art-Net (DMX-über-Netzwerk) angeschlossen.
Stromversorgung Das MADRIX® PLEXUS kann auf zwei Arten mit Strom versorgt werden. Nutzen Sie entweder das externe USB-Netzteil oder verbinden Sie das PLEXUS direkt mit einem freien USB 2.0-Anschluss Ihres Computers. Öffnen der Metallklappe Das MADRIX® PLEXUS ist mit einer soliden Metallklappe am oberen Ende des Gerätes ausgestattet. Diese schützt den SD-Kartensteckplatz, den Erweiterungsanschluss sowie den Kensington-Sicherheitsanschluss.
Anschlussmöglichkeiten Anschlüsse Unten DMX 1 DMX 2 Anschlüsse Oben USB/Power Ethernet Push to Eject SD Extension 1 2 3 4 5 6 7 8 9 10 7) Status-LED für den SD-Kartensteckplatz 8) SD-Kartensteckplatz 9) KensingtonSicherheitsanschluss 10) Erweiterungsanschluss 1) XLR-Anschluss, DMX 1 2) XLR-Anschluss, DMX 2 3) Status-LED für USB/Strom 4) Anschluss für USB/Strom 5) Status-LED für Netzwerk 6) RJ45-Netzwerkanschluss Allgemeine Pin-Belegung von XLR-Anschlüssen Hier findet sich die allg.
SD-Karten Der integrierte SD-Kartensteckplatz befindet sich oben am Gerät. Zugang erhält man durch die angebrachte Metallklappe (siehe Abschnitt “Öffnen der Metallklappe” auf Seite 5). Unterstützt werden sowohl SD- als auch SDHCKarten. SDHC-Karten werden empfohlen. Einstecken der SD-Karte Halten Sie die SD-Karte wie auf dem Gerät dargestellt! Die abgeschrägte Ecke muss zur Status-LED und die Kontakte müssen in Richtung Display zeigen.
Wie geht die Menü-Auswahl? Drücken Sie “OK”, um das Menü zu öffnen. Nutzen Sie dann die Pfeiltasten zur Navigation. Wenn der gewünschte Menüpunkt ausgewählt ist, drücken Sie “OK”, um ihn zu aktivieren. Wie bearbeitet man Werte? Halten Sie die “OK”-Taste für 2 Sekunden gedrückt. Nutzen Sie die Pfeiltasten, um zu navigieren oder die Werte zu ändern. Die Eingabe wird mit “OK” gespeichert. Sprache Status Ein- und ausgehende Daten Wiedergabe IP-Adresse 8 Öffnen Sie das Menü “Settings” à “Device” bzw.
Anzeige der Status-LEDs Die folgenden Tabellen beschreiben die Funktionen der drei Status-LEDs. FARBE Schwaches grün Grün blinkend Überblenden zwischen grün + rot Orange USB/Power ist nicht angeschlossen. Das Gerät hat keinen Strom. Das USB-Netzteil ist angeschlossen. Das Gerät hat Strom. Kommunikation über USB; Daten werden über USB gesendet oder empfangen; Das Gerät hat Strom. Das Gerät funktioniert und arbeitet. Angeschlossen an USB; Treiber korrekt installiert; Das Gerät hat Strom.
Nutzung der MADRIX®-Software MADRIX® ist eine professionelle Software zur Steuerung von LEDs. Das PLEXUS bringt die Softwarelizenz für 1024 DMX-Kanäle bereits mit. Die Datenausgabe (die Lizenz) wird aktiviert, sobald das Gerät an einen Computer mit installierter und gestarteter MADRIX®-Software angeschlossen wird. Die USB- bzw. Netzwerktreiber müssen zudem in MADRIX® aktiviert sein.
Installation der MADRIX®-Software und Treiber Legen Sie die mitgelieferte CD in das CD-ROM-Laufwerk Ihres betriebsbereiten Computers ein. Die Installationsroutine von MADRIX® startet daraufhin automatisch auf Ihrem PC. Folgen Sie nun den Anweisungen auf dem Bildschirm, wie im Folgenden beschrieben. Um die Installation zu starten, klicken Sie bitte auf “Next”, wenn das oben dargestellte Fenster erscheint. Der Installationsvorgang kann zu jeder Zeit mit “Cancel” abgebrochen werden.
Das nächste Fenster stellt die Installationskomponenten zur Auswahl. Eine Beschreibung ist für jede Komponente gegeben. Bitte vergewissern Sie sich, dass mindestens “MADRIX” sowie “Interface Driver” ausgewählt wurde (Häkchen gesetzt). Diese Komponenten werden für den Gebrauch des MADRIX® PLEXUS benötigt. Klicken Sie nun auf “Next”. Im nächsten Fenster “Destination Folder” wird nach dem Installationsort gefragt. Bitte wählen Sie einen Ort auf Ihrer Festplatte aus und klicken Sie im Anschluss auf “Install”.
Der Gerätetreiber des MADRIX® PLEXUS Wenn Windows anzeigt, dass der Gerätetreiber nicht korrekt installiert werden konnte, so aktualisieren Sie den Treiber bitte von Hand. Rufen Sie in Windows XP “Start” “Einstellungen” “Systemsteuerung” “System” Reiter “Hardware” “Geräte-Manager” auf. Führen Sie unter “Andere Geräte” einen Rechtsklick auf “MADRIX PLEXUS” aus und wählen Sie “Treiber aktualisieren…”.
Live-Modus Das Gerät kann als Live-Interface für die Ausgabe von DMX-Daten mit Hilfe von MADRIX® eingesetzt werden. Entweder 2x DMX-OUT, oder 2x DMX-IN, oder 1x DMX-OUT und 1x DMX-IN, oder Art-Net stehen im Live-Modus zur Verfügung. MADRIX® muss zunächst, wie auf Seite 11 beschrieben, installiert werden. Schließen Sie das Gerät anschließend direkt über USB 2.0 oder für Art-Net mit Hilfe des USB-Netzteiles (oder USB 2.0) sowie über Netzwerk an.
Standalone-Modus 1. Konfigurieren Sie die Matrize Ihrer LED-Installation in MADRIX® über das Menü “Preferences” “Matrix Generator” oder “Preferences” “Patch”. 2. Erstellen Sie die gewünschten visuellen Effekte mit Hilfe der grafischen Benutzeroberfläche der Software MADRIX®. 3. Öffnen Sie in MADRIX® das Menü “Window” “Cue List” zum Erstellen einer Abspielliste. Eine Live-Aufnahme ohne Abspielliste ist ebenso möglich. 4.
Erweiterungsanschluss zur Fernsteuerung Über den 15-poligen, seriellen Anschluss können externe analoge 1 2 3 4 5 6 7 8 und digitale Geräte zur Fernsteuerung angeschlossen werden. Extension Rufen Sie in MADRIX® im Menü “Preferences” “PLEXUS Configuration…” “Extension Ports” auf, um die 10 Ports für die jeweilige PLEXUS-Konfiguration individuell zu konfigurieren.
Bedientasten zur Steuerung Während der Standalone-Wiedergabe kann über die Bedientasten gesteuert werden. Öffnen Sie dazu das PLEXUS-Menü “Standalone” “Wiedergabe”. Weitere Konfigurationsmöglichkeiten Es stehen weitere Konfigurationsmöglichkeiten zur Verfügung. Öffnen Sie dazu in MADRIX® das Menü “Tools” “PLEXUS Configuration…”. Weitere Informationen zum Thema finden Sie wie im Folgenden beschrieben.
Häufig Gestellte Fragen (FAQs) Brauche ich den MADRIX® KEY zusätzlich zum MADRIX® PLEXUS? Nein. Die MADRIX®-Softwarelizenz für 1024 DMX-Kanäle ist inbegriffen. Der MADRIX® KEY wird für den Betrieb des PLEXUS nicht benötigt. Jedoch kann man die Produkte und ihre Funktionen miteinander kombinieren. Ist es möglich, mehr als ein MADRIX® PLEXUS zu verwenden? Ja. Mehrere Geräte können problemlos für größere Projekte genutzt werden. Kann ich die PLEXUS-Softwarelizenz erweitern? Nein.