User manual

MADRIX PLEXUS User Manual (English) 15
© 2013 inoage GmbH
You can also configure the settings in the PLEXUS Configuration dialog
using MADRIX. For more information, see Managing Devices Further.
Menu Tools
The PLEXUS menu 'Tools' contains 4 entries.
Monitor DMX1
Navigate to the menu 'Tools' 'Monitor DMX1'.
Use this menu to monitor and check DMX data output or input of the
first XLR port (DMX 1).
You may change the settings and the functionality. Press and hold 'OK'
for 2 seconds.
'Show as' - Choose the overall display modus (Graphic, Table, Channel).
'Show values as' - Choose the display modus of values (Hexadecimal,
Decimal, Percent). Decimal cannot be displayed in Table mode.
Use or to scroll in Table mode.
Use or to change the DMX channel in Graphic and Channel Mode. In
Graphic mode, the individual channel will be shown in the upper right
corner in addition to the graphics.
Monitor DMX2
Navigate to the menu 'Tools' 'Monitor DMX2'.
Use this menu to monitor and check DMX data output or input of the
second XLR port (DMX 2).
You may change the settings and the functionality. Press and hold 'OK'
for 2 seconds.