User manual

MADRIX PLEXUS User Manual / Handbuch20
© 2013 inoage GmbH
Display
Navigate to the menu 'Settings' 'Display'.
You can specify various settings of the display in this menu.
'Brightness on' - specifies how bright the display is, when it is used.
Applicable values are: 10 - 100%. The default value is 100%.
'Brightness dimmed' - specifies how bright the display is, when it gets
dimmed. Applicable values are: 0 - 100%. The default value is 10%.
'Dim after' - specifies after how much time the display will be dimmed.
The default value is 30s.
'Contrast' - specifies the how well the display can be read. Applicable
values are: 0 - 100%. The default value is 50%.
'Invert' - specifies if the colors of the display will be inverted, or not.
Black background and a white font are the default settings.
You may change the settings in this menu, on the device (How To Edit
Values).
You can also configure the settings in the PLEXUS Configuration dialog
using MADRIX. For more information, see Managing Devices Further.
Device
Navigate to the menu 'Settings' 'Device'.
You may change basic settings of the device in this menu.
'Language' - specifies the language of the PLEXUS menus. You can set
English, German (Deutsch), or Spanish (Español).
'Rotate 180°' - will rotate the display by 180°. The displayed menus will
be shown upside down. Please note, at the same time the assignment
of the 5 control buttons will also be rotated by 180° to suit the rotated
display. The default settings is No.
'Timers' - can be 'Enabled' or 'Disabled'. This activates or deactivates all
Timers on the device globally, even if they are configured in your
PLEXUS Configuration. The default settings is Enabled.
'Ports' - can be 'Enabled' or 'Disabled'. This activates or deactivates all
Ports on the device globally, even if they are configured in your PLEXUS
Configuration. The default settings is Enabled.