User manual

4
End-Of-Life
This electrical device and its accessories need to be disposed of
properly. Do not throw the device into normal trash or household
waste. Please recycle packaging material whenever possible.
Usage
In general, this device is designed to be operated as a hardware control
interface to be connected towards various types of controllable lights / lighting
controllers via DMX512 (USB to DMX) or Art-Net (DMX over Ethernet). Do not
use the interface for any other, deviating purpose.
The device can be connected to and disconnected from the PC during use and
without a reboot (Hot Swapping & Plug and Play). Multiple interfaces can be
used at the same time. Please mind the correct supply of power in this case.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CE And RoHS Declaration Of Conformity
The device complies with the requirements set
forth in the council Directive of the law of the
Member States relating to electromagnetic compatibility (2004/108/EC), the
Low Voltage Directive (2006/95/EC), and the Directive on the restriction of
the use of certain hazardous substances in electrical and electronic equipment
(2011/65/EU) (RoHS). The compliance with these three Directives has been
evaluated in accordance with the following standards: EN 55011 (1998) +
A1 (2000) + A2 (2003), EN 55024 (1998) + A1 (2001) + A3 (2003), EN
61000-4-2 (2001), EN 61000-4-3 (2001), EN 61000-4-4 (2001), and EN
61000-4-6 (2001).
FCC Declaration Of Conformity
The device has passed the following tests of compliance:
FCC (2003) - Title 47, Part 15, class A, Radio frequency devices.
RoHS
compliant