User's Manual

1.打開背面電池蓋並裝入電池 AA *2 PCS
Open the battery cover and insert 2 PCSof AA battery
2.將 XLR ⼀端接⾄機艙⾳頻系統插座,另⼀端接⾄頭盔的 XLR 插座
Connect the XLR to theaudio systemand the other XLR to the helmet.
3.轉動 VR 旋鈕,可控制耳機⾳量大小
Turn the VR knob to control the volume of the headphones.
4.按電源鍵可提供+3V 電壓給頭盔降噪使用,開啟(紅色 LED 亮),關閉(紅色 LED 熄滅)
Press the power button to provide +3V voltage for the helmet to active the ANC function (active noise
canceling) of the helmet. (Red LEDindicator light)
Using theControllerwith a Bluetooth device
5.滑動藍牙開關可開啟或關閉藍牙
Slide the Bluetooth switch to turn Bluetooth on or off
6.藍牙開啟時首先進入配對狀態(藍色 LED 閃爍),打開裝置的藍牙後並搜尋裝置名稱“PFG-ANR”來
與控制盒連線,
第⼀次使用時需要手動配對與連線,之後配對裝置與控制盒的藍牙開啟後即可自動連線
When Bluetooth is turned on, first will enter into the pairing state (the blue LED flashes), turn on the
Bluetooth of the device and search for the device name "PFG-ANR" to connect to the controller.
When using for the first time, you need to manually pair and connect.
After that, the Bluetooth of the pairing device and the controller will be automatically connected after
being turned on.
7.播放⾳樂時,按接聽鍵控制暫停或播放,來電時按播放鍵,可接聽或掛斷電話
When the music plays, press the answer button to control pause or play.
Press the play button when incoming call, you can answer or hang up the call.