User`s manual

V1.4 – Apr-13
User’s Manual
Page 23 of 34
6 Electrical Characteristics
6.1 Operating Conditions
Pin
Description
Min
Typical
Max
3
Vcc
3.0V
3.3V
3.6V
Full power mode (Searching) Peak Current (1)
49mA
（TBC）
Full power mode (Searching) Average Current (2)
41mA
Full power mode (Tracking) Average Current (3)
24mA
Push-to-Fix Mode
920uA
Micro Power Mode（SiRFaware
TM
）
56uA
Hibernate Status
25uA
Table 6: A2035-H electrical characteristics
(1) Peak searching current is characterized by millisecond bursts above average searching current
(2) Average searching current is typically only the first two seconds of TTFF
(3) Tracking current typically includes tracking and the post searching portion of TTFF
6.2 Absolute Maximum Ratings
Symbol
Parameter
Min
Max
Unit
Vcc
Power supply
-0.3
+4.6
V
Vin
Voltage to I/O pin
-0.3
+3.6
V
Iov
Input current on any pin
-10
10
mA
Itdv
Absolute sum of all input currents during overload condition
200
mA
Tst
Storage temperature
-40
85
°C
Table 7: Absolute maximum ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause per-
manent damage to the device. This is a stress rating only. Functional operation of the
device at these or any other conditions beyond those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.