User`s manual

PRELIMINARY
V0.5 – Feb-11 User’s Manual Page 9 of 22
(6) Activate the correct port within GPS Cockpit. You can do this by selecting the
“COM port connection” icon (left-most icon) or by choosing “Port Number” in the
“Settings” menu.
In both cases the following window will appear:
Figure 6: GPS Cockpit COM Port Setting window
Choose the COM port to which the GPS receiver is connected (verify in your
system settings - device manager, which communication port is used for this
USB serial connection), in our example COM11 at 4800 baud (default setting for
the EVA2100-A), make sure that the On/Off box is checked, and click on “OK”: