Owner manual

TABLE 1
Inductance Percent Test Resistance Rated DC Current
L(μH) Tolerance Frequency RDC(Ω) Max. IDC1(A) IDC2(A)
1.5 N 100kHz/0.25V 80m 1.35 1.60 1R5
2.2 M,N 100kHz/0.25V 0.120 1.10 1.30 2R2
3.3 N 100kHz/0.25V 0.173 0.90 0.90 3R3
4.7 N 100kHz/0.25V 0.238 0.75 0.85 4R7
6.2 M,N 100kHz/0.25V 0.371 0.63 0.65 6R2
6.8 N 100kHz/0.25V 0.371 0.63 0.65 6R8
10 M,N 100kHz/0.25V 0.559 0.52 0.52 100
22 M,N 100kHz/0.25V 1.300 0.33 0.40 220
33 M,N 100kHz/0.25V 1.520 0.25 0.35 330
※ □ specify the inductance tolerance,M(±20%),N(±30%)
※ IDC1： Based on inductance change (△L/Lo： ≦ drop 35%) @ ambient temp. 25℃
IDC2： Based on temperature rise (△T： 40℃ TYP.)
Rated DC Current： The less value which is IDC1 or IDC2.
MSCDRI-2D11HP-SERIES Page-2/8
MSCDRI-2D11HP-3R3□
Marking
MAGLAYERS
PT/NO.
MSCDRI-2D11HP-2R2□
MSCDRI-2D11HP-1R5□
MSCDRI-2D11HP-4R7□
MSCDRI-2D11HP-6R8□
MSCDRI-2D11HP-100□
MSCDRI-2D11HP-330□
MSCDRI-2D11HP-220□
MSCDRI-2D11HP-6R2□
MAG.LAYERS