Owner's manual

ManualsBrandsMag Layers USA ManualsHardwareRT11P03

Networking Communication Components

RT Series

Lan Transformer

Part number: RT11P03

Part name :10/ 100 Transformer Single Port

●

Compliant and peak reflow temperature rating 245°C .

●

Meets IEEE802.3 specification.

●

Excellent common mode noise suppression.

●

Packaging specification is reel.

(

RT11P

□ □

: Reel )

Part number code

RT 1 1 P

□ □

Serial number

Type

Application Category

Ports

Product Symbol

Feature

Summary of content (7 pages)

PAGE 1
Networking Communication Components RT Series Lan Transformer Part number: RT11P03 Part name :10/ 100 Transformer Single Port Feature ● ● ● ● Compliant and peak reflow temperature rating 245°C . Meets IEEE802.3 specification. Excellent common mode noise suppression. Packaging specification is reel.
PAGE 2
REV. A Description Specification issued Date Drawn Designed 03.19.2012 Allen.Yu Allen.Yu Approved James.
PAGE 3
Mechanical Dimension and Marking A RT11P03 B Date Code UNIT mm A 12.70 +0.254/-0.254 B 9.50 +0.254/-0.254 C 5.97 +0.254/-0.254 D 1.27 +0.254/-0.254 E 0.50 +0.127/-0.127 F 6.90 +0.254/-0.254 inch 0.50 +0.010/-0.010 0.374 +0.010/-0.010 0.235 +0.010/-0.010 0.050 +0.010/-0.010 0.020 +0.005/-0.005 0.272 +0.010/-0.010 PIN 1 RT11P03 XX XX Week Year Maglayer Part Number C D E F Suggested Land Pattern a d b c UNIT mm inch a 8.89 0.350 b 10.50 0.413 c 6.30 0.248 d 1.27 0.050 e 0.8 0.
PAGE 4
Schematics RT11P03 CABLE SIDE TX+ TCT TX- 16 15 14 13 1 2 3 4 TD+ TCT TD- RX+ RCT RX- 12 11 10 9 5 6 7 8 RD+ RCT RD- RX TX PHY SIDE N.C. pins: 4 5 12 13 Electrical Specification @ 25°C, Humidity 65% RH Inductance @ Phy side(OCL) 100KHz, 0.
PAGE 5
Reflow Soldering 3°C /sec MAX. 245°C 217°C 200°C 150°C Pre-heating 53sec TYP. 60sec MIN. 180sec MAX. Soldering Temperature(°C) 6°C /sec MAX. 60sec MIN. 150sec MAX. Time(s) ● IR Reflow soldering : ● ● ● ● ● Preheat at 3℃ per second to 217℃ and using lead free solder , IR at 245℃ for 30seconds Max. Rework flow: Component must withstand two IR reflow cycles with a cool down between cycles Temperature is measured at the terminal portion of product (Using thermocoupler for measurement).
PAGE 6
Packaging Styles Per 13" reel : 650 pieces G Tape Dimensions F C E mm UNIT mm A 24.00± 0.30 F 2.00± 0.10 B 16.00± 0.10 G 1.50+ 0.10 C 1.75± 0.10 H 9.70± 0.10 D 11.50± 0.10 a 13.00± 0.10 E 4.00± 0.10 b 6.50± 0.10 10*E 40.00± 0.20 c 0.40± 0.05 b D A a c B H UNIT 6,5±0,1 0,5 330typ. Reel Dimensions 0,5 0,8 1± Ø2 2±0,5 Ø ± 13 30.4 max.
PAGE 7
Package Specification 1 reel / BOX 650 pieces / reel ANTI-STATIC (HEAT SEAL) LABEL REEL CARRIER TAPE VAPOR CAPSULE TO PREVENT OXIDATION COVER TAPE DRYER BOX PAPER TAPE 2 BOX / CARTON 1300 pieces / CARTON CARTON PAPER PAD