User guide

ManualsBrandsMag Layers USA ManualsHardwareRT14P05

Networking Communication Components

RT Series

Lan Transformer

Part number: RT14P05

Part name :Giga Transformer Single Port support PoE+

●

Compliant and peak reflow temperature rating 245°C

●

Meets IEEE802.3 specification.

●

Excellent common mode noise suppression.

●

Packaging specification is reel.

(

RT14P

□□

: Reel )

Part Number Code

RT 1 4 P

□□

Serial number

Type

Application Category

Ports

Product Symbol

Feature

Summary of content (7 pages)

PAGE 1
Networking Communication Components RT Series Lan Transformer Part number: RT14P05 Part name :Giga Transformer Single Port support PoE+ Feature ● ● ● ● Compliant and peak reflow temperature rating 245°C . Meets IEEE802.3 specification. Excellent common mode noise suppression. Packaging specification is reel.
PAGE 2
REV. A Description Specification issued Date Drawn Designed Approved 07.12.2013 Yuxuan.Xiang Yuxuan.Xiang James.
PAGE 3
Mechanical Dimension And Marking A RT14P05 B Date Code UNIT mm A 17.50 +0.254/-0.254 B 15.00 +0.254/-0.254 C 5.40 +0.254/-0.254 D 1.27 +0.254/-0.254 E 0.50 +0.127/-0.127 F 12.40 +0.254/-0.254 inch 0.689 +0.010/-0.010 0.591 +0.010/-0.010 0.213 +0.010/-0.010 0.050 +0.010/-0.010 0.020 +0.005/-0.005 0.488 +0.010/-0.010 RT14P05 XX XX PIN 1 Maglayer Part Number Week Year C D E F Suggested Land Pattern a b UNIT c d Drawn mm inch a 13.97 0.550 b 16.51 0.650 c 11.70 0.461 d 1.27 0.
PAGE 4
Schematics RT14P05 CABLE SIDE CMT1 24 1 TCT1 TX1+ TX1- 23 22 2 3 CMT2 TX2+ TX2- 21 4 TD1+ TD1- TCT2 20 19 5 6 TD2+ TD2- CMT3 TX3+ 18 17 7 TCT3 8 TX3- 16 9 TD3+ TD3- CMT4 TX4+ 15 10 TCT4 TX4- 14 13 11 12 TD4+ TD4- PHY SIDE Electrical Specification @ 25°C, Humidity 65% RH Inductance @ Phy side(OCL) 100KHz, 0.1V, 8mA DC Bias 350uH MIN Hipot Vrms, Sec Phy To Cable @ 1 mA 1/2 1500, 60 DC Resistance mOhms, TYP. Winding at cable side.
PAGE 5
Reflow Soldering 3°C /sec MAX. 245°C 217°C 200°C 150°C Pre-heating 53sec TYP. 60sec MIN. 180sec MAX. Soldering Temperature(°C) 6°C /sec MAX. 60sec MIN. 150sec MAX. Time(s) ● IR Reflow soldering : ● ● ● ● ● Preheat at 3℃ per second to 217℃ and using lead free solder , IR at 245℃ for 30seconds Max. Rework flow: Component must withstand two IR reflow cycles with a cool down between cycles Temperature is measured at the terminal portion of product (Using thermocoupler for measurement).
PAGE 6
Packaging Styles Per 13" reel: 400 pieces Tape Dimensions C E F b D A G c R0.75 B a 0.20±0.05 H UNIT mm UNIT mm A 32.00± 0.30 F 2.00± 0.10 B 24.00± 0.10 G 1.50± 0.02 C 1.75± 0.10 H 16.85± 0.10 D 14.20± 0.10 a 17.85± 0.10 E 4.00± 0.10 b 7.50± 0.10 10*E 40.00± 0.20 c 0.40± 0.05 11.85 330typ. Reel Dimensions 1 ø 2 2±0,5 ,8 ± 0 3 ø 1 ,5 ± 0 38.4 max.
PAGE 7
Package Specification 1 reel / BOX 400 pieces / reel ANTI-STATIC (HEAT SEAL) LABEL REEL CARRIER TAPE VAPOR CAPSULE TO PREVENT OXIDATION COVER TAPE DRYER BOX PAPER TAPE 2 BOX / CARTON 800 pieces / CARTON CARTON PAPER PAD