Operation Manual LA810E 18.1"Ultra High Resolution Digital Interface LCD Monitor LA810E.
Sicherheitshinweise 1. Lesen Sie die folgenden Hinweise vollständig durch. 2. Bewahren Sie die Anleitung auf. 3. Befolgen Sie alle Hinweise und Warnungen, die am Produkt selbst vermerkt sind. 4. Ziehen Sie den Netzstecker aus der Steckdose, bevor Sie das Gerät reinigen. Verwenden Sie keine flüssigen oder ätzenden Reinigungsmittel. Benutzen Sie zur Reinigung ein feuchtes, fusselfreies Tuch. 5. Betreiben Sie das Gerät niemals in der Nähe von Wasser. 6.
11. Wenn Sie ein Verlängerungskabel verwenden, vergewissern Sie sich, daß der Gesamtverbrauch aller angeschlossenen Geräte die maximale Belastbarkeit des Verlängerungskabels nicht überschreitet. Stellen Sie ebenso sicher, daß der Gesamtverbrauch aller Geräte den Wert von 15 A nicht überschreitet. 12. Stecken Sie keine Gegenstände durch die Lüftungsschlitze, da die elektronischen Komponenten im Gehäuseinnern Hochspannungen ausgesetzt sind.
FCC Compliance Statement NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Safety Instructions 1. Read all of these instructions. 2. Save these instructions for later use. 3. Follow all warnings and instructions marked on the product. 4. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5. Do not use this product near water. 6. Do not place this product on an unstable car, stand, or table. The product may fall, causing serious damage to the product. 7.
12. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. 13. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to service personnel. 14.
Contents Introduction ............................................................................... 7 Setup ........................................................................................ 9 Operation ................................................................................ 12 Care and Maintenance ............................................................. 14 Troubleshooting ....................................................................... 15 Technical Specifications ...............
Introduction Welcome to the exciting world of high resolution graphics with your purchase of a PanelVision monitor. This 18.1-inch intelligent LCD monitor features ultra high resolutions of up to 1280 x 1024 pixels. PanelVision is the most functional LCD you can buy, ensuring the safest, most productive computing experience possible. Unlike CRT monitors, PanelVision provides crisp, sharp images from center to edge. There’s no flicker to cause eyestrain and no electromagnetic radiation.
Unpacking Carefully unpack your monitor, saving the packing material for future transportation of your monitor. Confirm that all of the following items are included: • LCD monitor • ATI Rage Fury Pro (or Hercules 3D PROPHLT DDR-DVI) Video Adapter • AC-DC power adapter • This manual • Power Cord • Audio cable (option) • ATI (or Hercules) Installation Software CD-ROM or diskettes 8 LA810E.
Setup Environment In planning the environment in which you will use your monitor, • Avoid placing the monitor in direct sunlight and do not face the panel into direct sunlight to avoid glare. • Choose a well-ventilated area to avoid internal heat build up. Do not place the monitor on or near material which may block ventilation such as carpets or curtains. Avoid excessively dirty environments, and heat sources.
1 To insure a smooth installation, reinstall the Standard (VGA) graphics adapter driver through Control Panel / Display / Settings and set the display resolution to 1280 x 1024. 2 Power off the computer and display, then disconnect the display cable from the back of your computer. 3 Remove the computer cover. If necessary, consult your computer’ s manual for help.
USB Connectivity Your PanelVision monitor is equipped with one up-stream USB port and four down-stream USB ports. You may optionally connect your monitor to your computer via USB interface, and you may connect up to four USB peripherals, such as a keyboard, mouse or printer, directly to your monitor. DC LCD MONITOR REAR COVER PC AC Digital VGA Signal Cable Power Adapter Power Up You are now ready to use your PanelVision monitor. Switch on the power to both the monitor and to your computer.
Operation Panel Controls and Indicators Volume - Brightness + Volume + LED Brightness Power on/off Power Switch Press this button to turn the power On or Off. You may notice a one second delay before the monitor starts. Power Indicator The Power indicator should be On if the power cord is properly connected and the power button is switched On. During operation, the indicator light is green. It will turn orange if the monitor is in Power Saving mode or if there is no video signal.
Power Management Your PanelVision monitor can enter three different power states. These are On, Suspend and Off. The panel will enter Suspend and then Off to conserve power and preserve the screen. What state the panel is in depends on the signal that the panel is receiving from the adapter card in your computer. Thus your computer’ s power management settings will effectively set your panel’s power states under different conditions.
Care and Maintenance • The surface of your PanelVision screen is delicate. Avoid touching the screen and especially applying pressure to the screen with your fingers or other objects. Be especially careful to avoid touching the screen with sharp objects. • Use only non-ammonia glass cleaner on the screen. • Avoid spilling liquid on your PanelVision monitor. • If the LCD panel becomes dirty, wipe off the panel with a dry soft cloth.
Troubleshooting If your PanelVision monitor is not functioning properly, use the list below to isolate the problem and find remedies to common problems. No Picture 1 2 Is Power connected? • Connect the power cord • Check that the power switch is On Is the monitor receiving a video signal? • Check that the signal cable between the monitor and your computer is properly connected. • Check that the computer power switch is On • Check that the monitor is not in Suspend mode.
Technical Specifications LCD PANEL Digital 18. 1" T FT (T hin Film T rans is tor) DISPLAY SIZE (W X H) 14" x 11" (359. 0mm x 287. 2mm) MAXIMUM RESOLUT ION 1280 x 1024 @ 60Hz DISPLAY COLORS 16. 7M PIXEL PIT CH 0.
100% Recycled Paper PRINTED IN TAIWAN LA810E.
