User Guide

Magellan eXplorist 510 / 610 / 710 User Manual 37
Settings
The Magellan eXplorist has a Settings Menu that allows you to customize how the eXplorist displays
information, run diagnostic tests and other useful functions that will enhance your navigating experience.
The Settings Menu
Accessing the Settings Menu
1. Tap the Map screen to bring up the Four
Corner Menu screen.
2. Tap the Main Menu icon in the lower left
corner.
3. Tap the Tools icon at the bottom of the menu.
4. Select Settings from the Tools Menu.
5. The Settings Menu is displayed with
up and down arrows at the bottom to
help you step through the tool options.
Settings
Brightness and Volume
Adjusting Brightness
1. Access the Settings Menu.
2. Tap on the Brightness & Volume button.
3. Use the Brightness slider to increase or
decrease the display intensity.
Setting the Backlight Timer
The Backlight Timer turns the backlight off, saving
battery life, if the display has not been touched in
the time selected.
1. Access the Settings Menu.
2. Tap on the Brightness & Volume button.
3. Tap the Backlight Timer drop-down menu
and select the duration that the backlight will
remain on without a screen touch.
Adjusting Volume
1. Access the Settings Menu.
2. Tap on the Brightness & Volume button.
3. Use the Volume slider to increase or decrease
the speaker volume.
Muting the Volume
1. Access the Settings Menu.
2. Tap on the Brightness & Volume button.
3. Tap on the Mute button. When checked the
volume is muted.
Setting Alerts to Vibrate
1. Access the Settings Menu.
2. Tap on the Brightness & Volume button.
3. Tap on the Vibrate button. When checked
alerts will cause the receiver to vibrate.
Turning Button Sounds On/Off
1. Access the Settings Menu.
2. Tap on the Brightness & Volume button.
3. Tap on the Button Sounds button. When
checked, tapping on buttons will sound a
audible click.
Power
Setting Active Suspend Timer
This sets the duration that the receiver will remain
on before going into active suspend mode if the
screen hasn’t been touched. Active suspend puts
the receiver in a power save mode but continues to
record your track.
1. Access the Settings Menu.
2. Tap on the Power button.