Specifications

ManualsBrandsMagellan ManualsOtherMG-6060

All-In-One Wireless Security System V1.3

Programming Guide

Model # MG-6060 / MG-6030

Table of Contents

Things You Should Know ..................................... 2

About This Programming Guide........................................... 2

Conventions......................................................................... 2

Installer Code (Default: 0000 / 000000)............................... 2

Maintenance Code (Default: 1111 / 111111) ....................... 2

Master Code (Default: 1234 / 123456)................................. 2

Decimal and Hexadecimal Values ....................................... 2

Entering Programming Mode ............................... 3

Single Digit Data Entry Method............................................ 3

Feature Select Programming Method .................................. 3

Installer Quick Keys .............................................. 3

Zone Programming................................................ 3

Wireless Transmitter Programming..................... 4

System Timers ....................................................... 4

On-board Programmable Outputs (PGMs) .......... 5

System Options ..................................................... 5

Communicator Settings ....................................... 8

Report Codes ......................................................... 9

Remote Control Button Programming ............... 10

System Settings ................................................... 11

Wireless Programmable Output (PGM) Settings 12

Appendix 1: PGM Event Table ............................ 12

Appendix 2: Specifications ................................. 15

Appendix 3: Connection Diagrams..................... 15

Power Connections ........................................................... 15

Telephone Line Connections ............................................ 16

PGM Connections ............................................................. 17

Hardwire Zone Connections.............................................. 18

Connecting the Radio Antenna (MG-6060 only) ............... 18

Connecting to a UIP-256................................................... 19

X10 Transmitter Connections (MG-6060 only).................. 19

Connecting Magellan to WinLoad ..................................... 20

Connecting a Paradox Memory Key (PMC-3)................... 20

Tabletop Mounting ............................................................ 21

Mounting Magellan on the Wall......................................... 21

Appendix 4:

Ademco Contact ID Report Code List ................ 22

Appendix 5: Automatic Report Code List .......... 24

Summary of content (28 pages)

PAGE 1
All-In-One Wireless Security System V1.3 Programming Guide Model # MG-6060 / MG-6030 Table of Contents Things You Should Know ..................................... 2 About This Programming Guide........................................... Conventions ......................................................................... Installer Code (Default: 0000 / 000000) ............................... Maintenance Code (Default: 1111 / 111111) ....................... Master Code (Default: 1234 / 123456).............
PAGE 2
Things You Should Know About This Programming Guide This programming guide should be used in conjunction with the Magellan Reference & Installation Manual which can be downloaded from our website at www.paradox.ca. Use this guide to record the settings programmed for this console. Conventions This symbol designates a warning or important information. This symbol designates a suggestion or reminder. This symbol designates a reference to another section, manual or guide.
PAGE 3
Entering Programming Mode Use the built-in keypad to access Magellan’s installer programming mode. To access programming mode: 1. 2. 3. 4. 5. Press and hold the [0] key. Enter your [INSTALLER CODE] or [MAINTENANCE CODE]. Enter the 3-digit [SECTION] you wish to program. Enter the required [DATA]. Press the [*] key to clear data or to go back one step. Press the [#] key to save changes.
PAGE 4
Wireless Transmitter Programming In the desired zone’s corresponding section, assign the transmitter’s serial number. In sections [058] and [059], assign the 6-digit serial number of the transmitter that you are using as a wireless doorbell. You can also use these sections to view transmitter signal strength.
PAGE 5
On-board Programmable Outputs (PGMs) Section Description Event Group # Sub-group # Default PGM1 Activation Event (____/____) (____/____) No event programmed PGM1 Deactivation Event (____/____) (____/____) No event programmed [088] PGM2 Activation Event (____/____) (____/____) No event programmed [089] PGM2 Deactivation Event (____/____) (____/____) No event programmed [086] [087] Refer to Appendix 1: PGM Event Table on page 13 for the PGM events that can be used to program Magellan’s
PAGE 6
[094] Zone Options Bold = Default setting Option OFF ON [1] Stay delay zones Disabled Enabled [2] Report zone restore On Bell cut-off On zone closure [3] & [4] Tamper recognition options † See table See table See table See table [3] OFF OFF ON [4] OFF ON OFF ON ON - Disabled - Trouble only - Disarmed: Trouble only - Armed: Follow zone’s alarm type (page 3) - Disarmed: Audible alarm - Armed: Follow zone’s alarm type (page 3) [5] Generate tamper trouble if detected on b
PAGE 7
[098] Dialer Options Bold = Default setting Option [1] & [2] Telephone line monitoring options * [1] [2] OFF OFF - TLM disabled OFF ON - Generate a trouble ON OFF - Generate audible alarm if armed ON ON - Silent alarms become audible OFF ON See table See table See table See table [3] Switch to pulse on 5th attempt Disabled Enabled [4] Call back Disabled Enabled [5] Alternate dialing Disabled Enabled [6] Force dial Disabled Enabled [7] DTMF diali
PAGE 8
[103] Wireless Transmitter Supervision Zone Options * Bold = Default setting Option [104] OFF ON [1] Zone 1 supervision Disabled Enabled [2] Zone 2 supervision Disabled Enabled [3] Zone 3 supervision Disabled Enabled [4] Zone 4 supervision Disabled Enabled [5] Zone 5 supervision Disabled Enabled [6] Zone 6 supervision Disabled Enabled [7] Zone 7 supervision Disabled Enabled [8] Zone 8 supervision Disabled Enabled OFF ON Wireless Transm
PAGE 9
Table 1: Special Keys for Telephone Numbers Keys to press Action or Value [*] * [#] # Center [ACTION] (pause) key Add a 4-second pause to the telephone number.
PAGE 10
Tamper Restore Report Codes System Troubles Report Codes System Troubles Restore Report Codes Section Data Section Data Section Data [145] [146] [147] [148] ____/____ Zone 1 [149] ____/____ Future use [152] Default = FF Special Report Codes Section Data ____/____ TLM [155] ____/____ Cold start ____/____ Zone 2 ____/____ AC failure ____/____ AC failure ____/____ Test report ____/____ Zone 3 ____/____ Battery failure ____/____ Battery failure ____/____ Future use ____/____ Zone 4 __
PAGE 11
Programming the MG-REM1 Section RC# Data (Default: 4DE0) [161] 1 ______ ______ Section RC# ______ ______ [169] Data (Default: 4DE0) ______ 9 ______ ______ ______ + [162] 2 ______ ______ ______ + ______ [170] 10 [171] 11 ______ ______ ______ ______ + [163] 3 ______ ______ ______ + ______ ______ ______ ______ ______ + [164] 4 ______ ______ ______ + ______ [172] 12 ______ ______ ______ ______ + + [165] 5 ______ ______ ______ ______ [166] 6 _____
PAGE 12
Wireless Programmable Output (PGM) Settings Section Description Event Group # Sub-group # Default [210] PGM1 Activation Event (____/____) (____/____) No event programmed [211] PGM1 Deactivation Event (____/____) (____/____) No event programmed [212] PGM2 Activation Event (____/____) (____/____) No event programmed [213] PGM2 Deactivation Event (____/____) (____/____) No event programmed [214] PGM3 Activation Event (____/____) (____/____) No event programmed [215] PGM3 Deactivat
PAGE 13
Appendix 1: PGM Event Table Event Group # 00 = Zone closed 01 = Zone opened Sub-group # 01 to 16 = Zone number 99 = Any zone number 02 = System status 00 = N/A 01 = N/A 02 = Silent alarm 03 = Buzzer alarm 04 = Steady alarm 05 = Pulsed alarm 06 = Strobe 07 = Alarm stopped 08 = Squawk ON 09 = Squawk OFF 10 = Ground start 11 = System disarmed 12 = System armed 13 = Entry delay engaged 99 = Any system status event 03 = Bell status 00 = Bell OFF 01 = Bell ON 02 = Bell Squawk Arm 03 = Bell Squawk Disarm 04
PAGE 14
Event Group # 14 = Special arming 15 = Disarming with user 16 = Disarm after alarm with user * 17 = Alarm cancelled with user ** 18 = Special disarming Sub-group # 00 = Auto-arming 01 = Late to close 02 = No movement arming 03 = Partial arming 04 = Quick arming 05 = Arming through WinLoad 99 = Any special arming event 01 to 16 = User number 99 = Any user number 00 = Auto-arm cancelled 01 = Disarm through WinLoad 02 = Disarm through WinLoad after alarm * 03 = Alarm cancelled through WinLoad ** 04 = Non-med
PAGE 15
Event Group # Sub-group # 34 = Special 00 = System power up 01 = Reporting test 02 = WinLoad logon 03 = WinLoad logoff 04 = Installer in programming mode 05 = Installer exited programming mode 06 = Closing delinquency delay elapsed 99 = Any special event 35 = Non-medical alarm 01 to 16 = User number 99 = Any user number * An armed system is or was in alarm and was disarmed by a user. ** A disarmed system is or was in alarm (e.g. 24Hr. zone) and was disarmed by a user.
PAGE 16
Appendix 3: Connection Diagrams Power Connections Figure 2: Connecting the AC Transformer Back view of the Magellan console. 12Vac to 16Vac 1A Do not use any switchcontrolled outlets. Insert the transformer’s wires into the AC terminals. Figure 3: Connecting the DC Power Supply Back view of the Magellan console. Insert the transformer’s wires into the AC terminals. 12Vdc to 18Vdc 1A DC Power Supply + Figure 4: Connecting the Battery Backview of the Magellan console. 1.
PAGE 17
Telephone Line Connections Figure 5: Telephone Line Direct Connect Telephone Line Connection Note The Magellan console must be able to seize the telephone line and place a call in an emergency situation. It must be able to do this even if other equipment (telephones, answering machines, computer modems, etc.) already has the line in use.
PAGE 18
Hardwire Zone Connections Figure 8: Hardwire Zone Connections Connecting the Radio Antenna (MG-6060 only) Figure 9: Connecting the Radio Antenna Back view of the Magellan console. If the radio reception is not very good, connect the supplied radio antenna to the ANT terminal of the Magellan console. Move the antenna around until the spot with the best reception is found.
PAGE 19
Connecting to a UIP-256 Figure 10: Connecting to a UIP-256 Universal In-Field Programmer Connect the 10pin cable of the UIP-256 to the 10pin connector of the Magellan console Back view of the Magellan console. Standard DB-9 cable (9-pin serial cable) UIP-256 Universal In-Field Programmer Download latest firmware version of Magellan from the Paradox website at www.paradox.ca X10 Transmitter Connections (MG-6060 only) Figure 11: Connecting the X10 Transmitter Back view of the Magellan console. 1.
PAGE 20
Connecting Magellan to WinLoad Figure 12: Connecting Magellan to WinLoad 4- to 10-pin cable (supplied with the 306 Adapter) 306 Adapter Computer containing WinLoad software Standard DB-9 cable (9-pin serial cable) Back view of the Magellan console. 4-pin connector cable Connecting a Paradox Memory Key (PMC-3) Figure 13: Connecting a Paradox Memory Key (PMC-3) PMC-3 Back view of the Magellan console.
PAGE 21
Tabletop Mounting Figure 14: Tabletop Mounting To mount the Magellan console on a tabletop the wall plate has to be inserted beforehand: 1. Slide the wall plate’s tabs labeled B into the Magellan console’s open slots labeled D (see Figure 15 on page 21). 2. Insert two screws (included) through the wall plate’s screw holes labeled C into holes labeled E in the Magellan console (see Figure 15 on page 21). 3.
PAGE 22
Appendix 4: Ademco Contact ID Report Code List CID# Reporting Code Programming Value Medical Alarms - 100 CID# Reporting Code Programming Value CID# Notification appliance chk.
PAGE 23
CID# Reporting Code Programming Value CID# Reporting Code Programming Value CID# Reporting Code Programming Value 387 Intrusion detector Hi sensitivity 75 451 Early open/close 9A 603 Periodic RF transmission BF 388 Intrusion detector Low sensitivity 76 452 Late open/close 9B 604 Fire test C0 389 Sensor self-test failure 77 453 Failed to open 9C 605 Status report to follow C1 391 Sensor watch trouble 78 454 Failed to close 9D 606 Listen-in to follow C2 392 Drift c
PAGE 24
Appendix 5: Automatic Report Code List System Event Default Contact ID Report Code when using sections [790] to [795] Default SIA Report Code when using sections [790] to [795] Arming with Master Code (##) 3 4A1 - Close by user CL - Closing Report Arming with User Code (##) 3 4A1 - Close by user CL - Closing Report Arming with Keyswitch (##) 3 4A9 - Keyswitch Close CS - Closing Keyswitch Auto Arming 3 4A3 - Automatic Close CA - Automatic Closing Arm with PC software 3 4A7 - Remote arm/disarm
PAGE 25
System Event Default Contact ID Report Code when using sections [790] to [795] Default SIA Report Code when using sections [790] to [795] AC Failure 1 3A1 - AC loss AT - AC Trouble Battery Failure 1 3A9 - Battery test failure YT - System Battery Trouble Auxiliary supply trouble 1 3AA - System trouble YP - Power Supply Trouble Bell output current limit 1 321 - Bell 1 YA - Bell Fault Bell absent 1 321 - Bell 1 YA - Bell Fault Clock lost 1 626 - Time/Date inaccurate JT - Time Changed Fire
PAGE 26
Warranty Paradox Security Systems Ltd. ("Seller") warrants its products to be free from manufacturing defects in materials and workmanship for one-year following the date of manufacture. Seller will, within this period, at its option, repair or replace any product failing to operate correctly without charge to the original purchaser or user.
PAGE 27
PAGE 28
Installer Menu Overview ready to arm menu Must enter the installer, maintenance or user code to access 1-bypass zones 2-alarm clock 3-time and date 4-system 1-language setup 2-user profile† 3-communicator central report? voice report? utility report? add tel. # 1 add tel. # 1 add tel. # 1 add backup # add tel. # 2 add tel. # 2 pager report? add service tel? (MG-6060 only) add tel. # 1 tel.