Specifications

Magellan 19
Connecting to a UIP-256
Figure 10: Connecting to a UIP-256 Universal In-Field Programmer
X10 Transmitter Connections (MG-6060 only)
Figure 11: Connecting the X10 Transmitter
Back view of the
Magellan console.
Standard
DB-9 cable
(9-pin serial
cable)
Connect the 10-
pin cable of the
UIP-256 to the 10-
pin connector of
the Magellan
console
Download latest
firmware version of
Magellan from the
Paradox website at
www.paradox.ca
UIP-256
Universal
In-Field
Programmer
Back view of the Magellan console.
Inverted
4-pin
RJ-11
cable
X10 transmitter
1. Connect one end of the inverted
4-pin RJ-11 cable into the X10
plug of the console.
2. Connect the other end of the
inverted 4-pin RJ-11 cable into
the X10 transmitter.
3. Plug the X10 transmitter into a
standard wall outlet.
1
2
3
Do not connect the X10
transmitter into this plug.
Inverted 4-pin
RJ-11 cable
For information on
programming the X10
features of Magellan, refer to
the X10 Operation User
Guide which can be found
and downloaded for free
from our Web site at
www.paradox.ca.
Make sure that an inverted 4-pin
RJ-11 cable is used when
connecting the Magellan console to
the X10 transmitter. Note the pin
configuration below:
Magellan
Console
X10
Transmitter
Pin 1 Pin 4
Pin 2 Pin 3
Pin 3 Pin 2
Pin 4 Pin 1
X10 devices (transmitters,
modules, etc.) are not
supplied and cannot be
purchased through Paradox
Security Systems Ltd.