Installation manual

Click on Compass Calibration Then enter in the vehicle heading
Once you click on “Save Settings” the dish will move about for about 6 to 10 minutes and then “Finish”
the calibration. The dish will not
stow after the dish compass has calibrated.
After the calibration, the Vehicle Heading of the
Administrative window should match (within 1-2 degrees)
the vehicle heading you entered.
That’s it for compass calibration… You do not need to
move the vehicle.
STEP 6 – FIND SATELLITE
To begin commissioning the Direcway modem, you’ll have the MAGELLAN find satellite. The
problem is that if you press on the “Find Satellite” button before you perform a compass calibration, the
dish may be searching for the satellite in the wrong part of the sky. Please take good notes on this
process:
11