Specifications

13
13
RAISING THE DISH – Using the Remote Panel
Press the “Power” button on the MAGELLAN Remote Control Panel. The Green power
light will come on in a second or two. If red lights are blinking wait a minimum of 90
seconds for the system to fully boot. This booting process is actually the MAGELLAN
system waiting for the DW7000 HughesNet modems to boot. Once the modems are read
by the MAGELLAN, only the Power light will remain on but the other lights will stop
blinking.
Press the “Find Satellite” button. This dish will begin to rise up, and search for the
satellite. Once found, it will peak Azimuth and Elevation on the satellite signal, and then
move the skew of the dish face for a final “Cross Pol” test.
The “On Signal” light will glow a solid green when the satellite is found.
The “TX Enabled” light will go solid green when the system is online.
EXPLIANTION OF LED LIGHTS
Moving – The Dish is moving
Searching – The Dish is searching for the satellite in a rectangular search window.
Stowed – The dish is stowed
On Signal – The satellite has been found. It does not mean dish is online.
Error – There was an error in finding the satellite.
TX Enabeled – The HughesNet Transmitter is enabled. The system is operational.
That’s it… your network is online. You may connect any computer to the MAGELLAN
and connect to the Internet.
WARNING
The HughesNet dish transmit power
is about 1 Watt, and is relatively
harmless (Your cell phone transmits
about .7 watts). However, there is a
danger zone of the dish between the
LNB and the Dish Reflector.
Do not place any part of your body
in this danger zone while the dish
can transmit. The roof of the vehicle
is off limits to both adults and
children.
For Troubleshooting your connection.. Please visit APPENDIX X - Troubleshooting.
STOWING THE DISH – Using the Remote Panel
To Stow the dish… Simply press on the “Stow Dish” button. The dish will stow in a
couple of minutes.