® For complete details on using your Magellan® RoadMate® RV9365T-LMB, please go to magellanGPS.com/support and download the user manual in .pdf format.
Safety IMPORTANT SAFETY WARNINGS The Magellan RoadMate receiver is a vehicle-navigation aid designed to assist you in arriving at your selected destinations. When using the Magellan RoadMate receiver, these safety rules must be followed to prevent accidents that can result in injury or death to yourself or others: Please check the applicable regulations in your state regarding windshield mounting. Certain states prohibit the mounting of any items on your windshield. Go to www.magellanGPS.
Charging the Magellan RoadMate An optional AC adapter is available as an accessory for your Magellan RoadMate. Use of another type of AC adapter can result in malfunction and/or possible fire hazard due to battery overheating. Only use the car charger approved for/supplied with your Magellan RoadMate receiver. Use of another type of car charger will result in fire or electric shock.
the equipment without the approval of manufacturer could void the user’s authority to operate this equipment. The Magellan RoadMate receiver must be installed and operated at a distance no closer then 8 inches (20 cm) from the user. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. IC statement Operation is subject to the following two conditions: 1. This device may not cause interference and 2.
Table of Contents Introduction...................................................................................................................................1 Powering on the Magellan RoadMate receiver....................................................................................... 3 Turning the Magellan RoadMate receiver On.......................................................................................... 3 Turning the Magellan RoadMate receiver Off........................................
Installation....................................................................................................................................8 Adjusting the Mount for Optimum Viewing............................................................................................ 9 Connecting Power............................................................................................................................................ 9 Power Switch............................................................
Routing to an Address in Your Address Book........................................................................................18 Creating a New Entry in Your Address Book by Entering an Address...........................................19 Creating a New Entry in Your Address Book from a POI....................................................................19 Saving an Address to a OneTouch Icon...................................................................................................
Multi Destination Routes.............................................................................................................30 Editing the Destination List..........................................................................................................................31 Pairing your Bluetooth-ready Phone for the First Time ......................................................................32 Bluetooth......................................................................................
Vehicle Profile.............................................................................................................................36 Set Vehicle Type...............................................................................................................................................37 Set Hazmat Type..............................................................................................................................................37 Accessing System Settings.....................
Viewing the GPS Status.................................................................................................................................42 Default System Settings.................................................................................................................................42 Restoring All Default System Settings........................................................................................................42 Viewing Product Information................................
Introduction Magellan RoadMate Receiver The Magellan® RoadMate® receiver is a vehicle navigation product that utilizes GPS signals from satellites to calculate your precise location and compute navigational information that can be used to guide you to your destination. Knowing its position and movement, it can then overlay this information on detailed maps to provide a visual representation of your location.
The Magellan RoadMate receiver includes Voice Alerts (Text-to-Speech) for driving instructions. This document is set up to be printed on 8.5” x 11” paper should you desire a printed version for your reference. Magellan RoadMate A B C D (A) Power Switch (B) AV Input. (Audio and video input to connect to portable DVD players, cameras, or any device with an AV output. Requires 3.5mm AV cable.) (C) Power Input (D) Micro SD card slot (A micro SD card is optional and is used for possible updates.) www.
Fundamentals Powering on the Magellan RoadMate receiver The Power On/Off switch is located on the top of the Magellan RoadMate receiver. Turning the Magellan RoadMate receiver On 1. Slide the Power button to the left. 2. After the initial splash screen the Warnings screen is displayed. Read and tap . Turning the Magellan RoadMate receiver Off 1. Slide the Power button to the center position. 2. Resetting the Magellan RoadMate receiver Off 3. Slide the Power button to the right.
Volume Changing the Volume from the Map Screen 1. Tap the speaker icon . Additional controls appear. 2. Tap the Mute button to mute the volume, or tap the ‘+’ or ‘-’ buttons to raise or lower the volume. 3. Tap . Changing the Volume from Settings 1. Access the Main Menu. 2. Tap the Settings icon . 3. Tap Sound. 4. Tap inside the Master volume adjust bar to change the volume level of the Magellan RoadMate receiver. 5. Tap to save and exit. Setting Button Sounds on or off 1.
Main Menu The Main Menu contains large, easy to access icons for all the major functions. Accessing the Main Menu When you first turn on the Magellan RoadMate receiver, the Main Menu is displayed after the splash and warning screens. While in use, you can access the Main Menu by: 1. From the Map screen tap Menu. Buttons on the Main Menu Screen Button Name Address Description Used to enter an address as a destination for you route.
Keypad Understanding the keypad while entering an address is an important part of using your Magellan RoadMate receiver. The keypad is the most common method for entering data into the Magellan RoadMate receiver. Keypad Overview Button Name Data Field Previous destination list Zip Code Numeric Keypad Description Top of the display where the characters entered are shown. Characters you enter are displayed in black, characters that are filled in by the Magellan RoadMate receiver are in green.
Notes on Entering Data If you are having trouble getting the results you expected, here are a few useful tips. • Check for apostrophes and hyphens. If you do not see the POI or street name you are looking for in the list, check to see if the name has an apostrophe or hyphen. • The more characters you enter, the smaller the list of possible options is from which to choose. • When entering a street or city name it is not necessary to use accented letters.
Installation Installation of the Magellan RoadMate receiver is simple and easy. The hardest part will be picking the best location. Selecting the Location A few tips on selecting the proper location. • Mount the Magellan RoadMate receiver in a place where it can be easily seen and will not interfere with your view of the road.
Adjusting the Mount for Optimum Viewing Loosen the adjustment locking knob and position the Magellan RoadMate receiver for optimum viewing. Once set, tighten the locking knobs. (Never attempt to adjust the mount while driving.) Connecting Power Plug the end of the vehicle power adapter into a 12VDC vehicle power receptacle. Connect the other end of the cable to the Magellan RoadMate receiver’s power connector as shown.
Map Screen The most commonly used screen is the Map screen. Whether you are following a route or just traveling around a city, the chances are that the Map screen will be displayed. The Map screen can be displayed in two unique modes: normal and routing. In normal mode, your position is shown on the map along with the time. As you travel, your position will be updated, giving you a clear view of your position and surrounding streets. (A) Current location. (B) Information display.
(A) Turn instructions for next maneuver. Tap to display the maneuver list (available only when routing). Distance and road name for the next maneuver. Tap to repeat last voice instruction. (B) Speed limit (C) Information display. Displays speed, time of day, elevation, compass direction. While routing it also can also display distance to destination, estimated time of arrival (ETA), and time remaining. Tap on the information field to change. (D) Zoom Out (E) Current position and heading.
3. Tap . Setting Zoom Levels Select the zoom level that best suits your needs. Note that zoom levels are limited in 3D mode. As you zoom out in 3D, the display will switch to 2D at higher zoom levels. 1. Tap the ‘+’ or ‘-’ zoom level buttons at the bottom of the display to set the desired zoom level. Panning on the Map 1. While viewing the Map screen, slide your finger or a stylus across the map. 2. The map screen changes to Pan mode. 3.
Current Location Screen The Current Location screen displays the approximate address of your current position, the next and previous intersections, your latitude, longitude, heading and elevation. Accessing the Current Location Screen There are two ways to open the Current Location screen. From the Map screen: 1. From the Map screen tap on the current position icon . Saving Your Current Location to Your Address Book 1. From the Map screen tap on the current position icon . 2. Tap Save. 3.
Excluding a Maneuver This is used to modify the route to possibly avoid routing on a particular street. 1. Access the Maneuver List. 2. Tap the Avoid icon 3. Tap Yes to confirm. 4. The Magellan RoadMate receiver recalculates the route and the Map screen returns. for the maneuver you want to avoid. Volume The volume can be adjusted or muted from the Map screen. (The volume can also be adjusted from Settings > Sound.) Changing the Volume from the Map Screen 1. Tap the speaker icon .
Creating a Destination Creating a Destination to an Address When creating an address, the first step is to enter the city. The city can be specified by entering the name of the city, entering the ZIP code for the city or by selecting a previously used city. 1. From the Main Menu tap the Address icon. 2. Enter City: You have three ways to do this: To select the city from the list of previous cities, tap the previous destination button.
8. Tip: If you know that you will use a destination later, before tapping the orange button you can tap Save to save it in your Address Book or in the OneTouch menu. Tips on Entering Addresses Quickly • When you are entering the name of a city or a street, Magellan software only displays those characters that appear in possible search results. The other characters are grayed out.
6. (optional) Tap Options if you want to change the routing method. 7. Tap the large GO button on the right to return to the Map screen and begin routing. Creating a Destination to a City Center City Center allows you to select any city on the map as your destination. This option is particularly useful when you want to go to a city without having any specific address to select. (A route to a city center uses the geographical center of the city as the destination point.) 1.
3. On the Go screen, tap Save. 4. The Edit Information screen is displayed. If you want to save this location to the OneTouch menu, select Add to OneTouch. 5. Edit information: Tap the Name field and use the keyboard to enter a name for the address book entry. (optional) Tap to specify a phone number for the address book entry. (optional) Tap List Categories to bring up a list of categories you have created for your address book.
Creating a New Entry in Your Address Book by Entering an Address 1. From the Main Menu, tap the Address icon, and enter an address as described in “Entering an Address”. 2. When the screen appears with the address of the selected location, the estimated time of arrival (ETA), the distance to travel, and the routing method (e.g. Fast), tap Save. 3. Edit information: Tap the Name field and use the keyboard to enter a name for the address book entry.
4. When the details for this address are acceptable, tap the 5. If you have selected to save this to the OneTouch menu, you asked to select a the OneTouch button you want it assigned too. www.magellangps.com .
OneTouch Menu In addition to Home Address, there are other icons in the OneTouch Menu. There are predefined bookmarks as well as user assignable bookmarks for searches and favorite destinations. They can be used for easy access of frequent destinations and to get local information when needed. Furthermore, you can assign POI search criteria to OneTouch icons. The OneTouch menu now has two tabs at the top of the display; Home and Travel.
1. Tap the button in the top right corner of the Map screen. 2. Tap one of the Assign buttons. 3. Tap Search. 4. Tap one of the POI categories in the list. 5. If the next screen contains a list of subcategories, tap one of the POI subcategories in the list to further narrow the search, or tap “Any xxx” to see the list of all nearby POIs from the selected main POI category. 6. Repeat selecting subcategories until the list of POIs appear.
The Save button saves the destination, not the trip. After selecting one of the three options, the Multiple Destination List is displayed. You can ‘drag n drop’ the displayed destinations to any order desired. Tap ‘Optimize’ to have the receiver compute the fastest method for completing the trip when the order of the destinations is not important. Confirm the trip by tapping the Go button. www.magellangps.
Points of Interest (POI) The Magellan RoadMate receiver has preloaded POIs that can be used as a destination for a route. Selecting a restaurant or finding a gas station nearby is at your fingertips. Creating a Route to a POI by Category POIs are categorized into unique categories from gas stations to tourist attractions. Most, but not all categories are further organized into subcategories.
6. Select the POI desired from the list of POIs. 7. The ‘Go’ screen appears with the address of the selected location, the estimated time of arrival (ETA), the distance to travel, and the routing method (e.g. Fast). 8. (optional) Tap Options if you want to change the routing method. 9. Tap the large Go button on the right to return to the Map screen and start navigating.
Home Address Your most frequent destination can be entered and saved in the Magellan RoadMate as the Home Address for quick and easy access when you need to navigate there. This does not need to be your real home address. Choose any address you visit frequently. You can access it at any time with the first button of the OneTouch menu. Saving the Home Address These instructions only apply if you have never entered a home address. button in the top right corner of the Map screen. The OneTouch menu 1.
www.magellangps.
Traveling on a Route Map Screen When a route has been calculated, it will be displayed on the Map screen in green with small arrows indicating the direction of travel. The top of the screen displays the name of the street that comes next in your Turn List together with its distance. If you are not in the city in which the next street is, the name of the city is displayed instead. As the route progresses, voice alerts will be used to prompt you of upcoming maneuvers.
Special Routing Functions Cancelling a Route 1. From the Map screen, tap Menu. 2. On the Main Menu, tap the cancel route 3. Confirm that you want to cancel the route. Tap Yes. icon. OR 1. Tap the OneTouch icon from the Map screen to display the OneTouch menu. 2. Tap the cancel route 3. Confirm that you want to cancel the route. Tap Yes. icon. Detouring off a Route 1. From the Map screen, tap Menu. 2. Tap the Detour icon. 3.
Multi Destination Routes With the Magellan RoadMate you can create routes with more than one destination. Select one destination and create a single route first. Then turn it to a multi destination route by selecting additional destinations. Creating Additional Destinations with Go To Using the search functions of the Magellan RoadMate you can easily create a route with multiple destinations. 1. From the Main Menu, tap the Itinerary icon. 2. Tap Multiple Stop Trip. 3. Tap + Add. 4.
Editing the Destination List You can also edit a multi destination route without adding new destinations. 1. From the Map screen, tap Menu. 2. Tap Address Book icon. 3. Select the Trip from the list. 4. Tap on the direction list on the screen. 5. Tap on one of the addresses to move it up or down in the list. 6. Tap Optimize to optimize the route. 7. Tap Add to put another destination in the route. 8. When done, tap 9.
Bluetooth Please note that not all of the features of the Magellan RoadMate Bluetooth will work with all phones as features of cellular phones vary from manufacturer to manufacturer. Pairing your Bluetooth-ready Phone for the First Time Before you use the Bluetooth function of the Magellan RoadMate receiver you must pair your Bluetooth-ready phone to the RoadMate. A list of compatible phones can be found on the Magellan web site at www.magellangps.com/support.
Bluetooth Settings Accessing the Bluetooth Settings 1. From the Map screen, tap the Bluetooth icon 2. Tap the Settings icon. . Enabling/Disabling Bluetooth 1. Access the Bluetooth Settings screen. 2. Check Enable Bluetooth to turn Bluetooth on; uncheck to turn Bluetooth off. Enabling/Disabling Auto Connect 1. Access the Bluetooth Settings screen. 2.
Redial 1. From the Map screen, tap the Bluetooth icon . 2. If there is a phone number that can be redialed it will appear in the second button (marked Redial). 3. Tap the Redial button. 4. The Magellan RoadMate will begin calling the number. Manual Dialing 1. From the Map screen, tap the Bluetooth icon . 2. Tap Dial Pad. 3. Using the keypad, enter the number you want to call. 4. Tap the green call button. 5. The Magellan RoadMate will begin calling the number.
Speed Dialing a Phone Number 1. From the Map screen, tap the Bluetooth icon . 2. Tap Speed Dial. 3. Tap the button with the phone number you want to call. 4. The Magellan RoadMate will begin calling the number. Answering a Call 1. When your phone gets an incoming call, the Magellan RoadMate displays an Answer Phone screen. Tap the green button to answer the call or the red button to end the call. Available Options During a Call When a call is connected the Connected screen is displayed.
Vehicle Profile Set your vehicle profile so that when routes are being calculated you will not be routed over roads that your vehicle cannot travel on. Accessing Vehicle Profile 1. From the Map screen tap Menu. 2. Tap the Vehicle Profile icon. 3. You can choose not to use the Vehicle Profile by unchecking the box on the Vehicle Profile screen. Set Vehicle Height 1. Access the Vehicle Profile screen. 2. Tap the Height button. 3. Enter your vehicle height in inches. Set Vehicle Width 1.
Set Vehicle Type 1. Access the Vehicle Profile screen. 2. Tap the Vehicle Type button. 3. Select from available choices. Set Hazmat Type 1. Access the Vehicle Profile screen. 2. Tap the Hazmat Type button. 3. Select from available choices (if applicable). www.magellangps.
Settings With user Settings you can customize the Magellan RoadMate receiver to better suit your personal needs and preferences. Accessing System Settings 1. From the Main Menu screen, tap the Settings icon. 2. Tap Sound. 3. Sound levels can be set for the navigation or the phone independently or together by using the “Master” slider. 4. Smart Volume adjusts the sound levels based on road noises. Setting Languages 1. Access the System Settings menu (above). 2. Tap Languages. 3.
Setting the Time Format 1. Access the System Settings menu (above). 2. Tap Time Format. 3. Tap on 24 Hours or 12 hours with am/pm. 4. Tap the back arrow . Selecting the Time Zone 1. Access the System Settings menu (above). 2. Tap Time Zone. 3. Check Auto Time Zone or select your time zone from one of the cities in the list. 4. Tap the back arrow . Selecting Units of Measure Auto power is the duration of time that the Magellan RoadMate receiver remains idle before turning off automatically.
Setting Heading Up or North Up in 2D Mode 1. From the Main Menu screen, tap the Settings icon. 2. Tap Map. 3. Tap 3D, 2D Heading Up or 2D North Up to toggle between settings. Assigning Visible POIs To avoid cluttering of the map, the POI icons that are displayed on the map can be turned on or off. 1. From the Main Menu screen, tap Settings. 2. Tap Map. 3. Tap POI Visibility. 4. Use the POI Selection screen to check those POIs you want shown and uncheck those you want hidden.
Muting the Sound 1. From the Main Menu screen, tap the Settings icon. 2. Tap Sound. 3. Checking Mute will mute all sounds. Turning off Button Sounds 1. From the Main Menu screen, tap the Settings icon. 2. Tap Sound. 3. Unchecking Button Sounds will turn off the audible indication that a button is tapped. Navigation Preferences Setting The Default Route Method 1. From the Main Menu screen, tap the Settings icon. 2. Tap Navigation Preferences. 3.
Keyboard Setting the Keyboard Layout. 1. From the Main Menu screen, tap the Settings icon. 2. Tap Keyboard. 3. Select QWERTY (default) or ABC keyboard layouts. GPS Options Setting the GPS Position It is useful to set a GPS position if you are not receiving satellite information quickly due to travelling over 800 km/500 mi with the Magellan RoadMate receiver turned off.
Viewing Product Information 1. From the Main Menu screen, tap the Settings icon. 2. Tap Product Information. (Note: Scroll down the page to view the Serial Number and Software Version.) Speed Warnings 1. From the Main Menu screen, tap the Settings icon. 2. Tap Speed Warning. 3. Set Audible Warning on or off. 4. Set Visible Warning on or off. 5. The Visible checkbox determines if the speed limit icon is displayed on the screen. 6.
