Owner's Manual

ManualsBrandsMagellan ManualsGPSRoadMate 2055

Table Of Contents

471 El Camino Real, Santa Clara, CA 95050

Magellan

RoadMate

2055

GPS Receiver

User Manual

Summary of content (46 pages)

PAGE 1
Magellan® RoadMate® 2055 GPS Receiver User Manual 471 El Camino Real, Santa Clara, CA 95050
PAGE 2
IMPORTANT SAFETY WARNINGS The Magellan RoadMate receiver is a vehicle-navigation aid designed to assist you in arriving at your selected destinations. When using the Magellan RoadMate receiver, these safety rules must be followed to prevent accidents that can result in injury or death to yourself or others: • Please check the applicable regulations in your state regarding windshield mounting. Certain states prohibit the mounting of any items on your windshield. Go to www.magellanGPS.
PAGE 3
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for class B digital devices, in accordance with part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 4
2. This device must accept any interference, including interference that may cause undesired operation of the device. IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits established for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
PAGE 5
iv
PAGE 6
Table of Contents Magellan RoadMate Receiver .............................................................................................. 1 Magellan RoadMate ............................................................................................................................. 2 Fundamentals ...................................................................................................................... 3 Powering on the Magellan RoadMate receiver ..............................................
PAGE 7
Creating a Destination to an Intersection ....................................................................................... 15 Creating a Destination to a City Center .......................................................................................... 15 Previous Destinations ...................................................................................................................... 16 Routing to a Previous Destination ...................................................................
PAGE 8
Traffic .................................................................................................................................27 Glossary ............................................................................................................................................. 27 Traffic Incidents ................................................................................................................................ 27 Avoiding a Traffic Incidents .......................................
PAGE 9
Assigning Visible POIs .................................................................................................................... 34 Setting Auto Zoom on Turns ............................................................................................................ 34 Setting Highway Lane Assist ...........................................................................................................34 Sound ......................................................................................
PAGE 10
Magellan RoadMate Receiver The Magellan® RoadMate® receiver is a vehicle navigation product that utilizes GPS signals from satellites to calculate your precise location and compute navigational information that can be used to guide you to your destination. Knowing its position and movement, it can then overlay this information on detailed maps to provide a visual representation of your location.
PAGE 11
Magellan RoadMate A C B (A) Power Switch (B) Power input from vehicle power adapter cable or optional AC power adapter. (C) Micro SD card slot. (A micro SD card is optional and can be used to back up and restore data.
PAGE 12
Fundamentals Powering on the Magellan RoadMate receiver The Power On/Off switch is located on the top of the Magellan RoadMate receiver. Turning the Magellan RoadMate receiver On 1. Slide the power switch to the left. 2. After the initial splash screen the Warnings screen is displayed. Read and tap . Turning the Magellan RoadMate receiver Off 1. Slide the power switch to the left.
PAGE 13
3. Tap Sound. 4. Tap the check box for Button Sounds. Check to have button sounds played, unchecked to turn them off. 5. Tap to save and exit. Brightness Accessing the Brightness Control 1. Access the Main Menu. 2. Tap the Settings icon . 3. Tap System. 4. Tap Brightness. 5. Tap inside the brightness adjust bar to set the desired brightness. 6. Tap to save and exit. On the Brightness screen there is a Dim on Battery Power option.
PAGE 14
Address Book Access the Address Book where you can save addresses and destinations to have available when needed. Intersection Used to create a route to the intersection of two streets. City City When selected, provides a way to select a city and route to its geographical center. Settings Displays the Settings menu. This menu can be used to access functions used to customize the Magellan RoadMate receiver to your personal needs. Current Location (Found on page 2).
PAGE 15
List (Enter City only) While entering a city, press the List button to bring up a list of cities beginning with the characters you have entered. Accept (Entering City) Accepts the suggested city that is displayed in the data field. (Entering street) Brings up a list of streets beginning with the characters entered. Selecting From List When a list of items found in the database are displayed, use the arrows on the right to move the list up and down and tap on the desired item in the list to continue.
PAGE 16
QuickSpell Another feature the Magellan RoadMate receiver uses to make entering cities and streets easier is a feature known as QuickSpell. In the example to the right, “CE” has been entered for a street name in Chicago, IL. The Magellan RoadMate receiver has predicted that the street name may be Cedar Ave. Also, it has greyed out any letters that could not be used to spell a street name in the database. This provides quick and errorfree city and street name entry.
PAGE 17
Installation Instructions Installation of the Magellan RoadMate receiver is simple and easy. The hardest part will be picking the best location. Selecting the Location A few tips on selecting the proper location. • Mount the Magellan RoadMate receiver in a place where it can be easily seen and will not interfere with your view of the road.
PAGE 18
Attaching the Magellan RoadMate receiver to the Car Cradle Slide the Magellan RoadMate receiver on the car cradle so that the slot on the Magellan RoadMate receiver aligns with the tab on the car cradle. Slide the Magellan RoadMate receiver all the way down until it rests on the 'feet'. You should notice a click when the receiver is fully mounted in the cradle. Adjusting the Mount for Optimum Viewing Loosen the adjustment locking knob and position the Magellan RoadMate receiver for optimum viewing.
PAGE 19
Map Screen The most commonly used screen is the Map screen. Whether you are following a route or just traveling around a city, the chances are that the Map screen will be displayed. The Map screen can be displayed in two unique modes: normal and routing. In normal mode, your position is shown on the map along with the time. As you travel, your position will be updated, giving you a clear view of your position and surrounding streets. (A) Current location. (B) Traffic Notification Icon.
PAGE 20
(F) Zoom in and zoom out controls to change the map scale. (G) Access Main Menu. (H) Access the list of nearest Highway Exit POIs (available only when driving on a highway/freeway/interstate). (I) Access volume controls. (J) Access OneTouch menu. The OneTouch menu gives you instant access to your bookmarked searches and favorite destinations. Accessing the Map Screen 1. On the Main Menu screen, tap View Map.
PAGE 21
Current Location Screen The Current Location screen displays the approximate address of your current position, the next and previous intersections, your latitude, longitude, heading and elevation. Accessing the Current Location Screen There are two ways to open the Current Location screen. From the Map screen: 1. From the Map screen tap on the current position icon . Saving Your Current Location to Your Address Book 1. From the Map screen tap on the current position icon . 2. Tap Save. 3.
PAGE 22
1. Tap the speaker icon 2. Tap on the Mute button 3. Tap 13 . . Additional controls appear. to mute the volume, or tap the '+' or '-' icons to change the volume levels.
PAGE 23
Creating a Destination Creating a Destination to an Address When creating an address, the first step is to enter the city. The city can be specified by entering the name of the city, entering the ZIP code for the city or by selecting a previously used city. 1. From the Main Menu tap the Address icon. 2. Enter City: You have three ways to do this: • To select the city from the list of previous cities, tap the button.
PAGE 24
Creating a Destination to an Intersection When the street number is not known, an intersecting street can pinpoint the location. 1. From the Main Menu, tap the Intersection icon. 2. Enter City: You have three ways to do this: • To select the city from the list of previous cities, tap the button. • To enter a new city: use the keyboard to enter the first few characters of any significant word in the city name. If the city you are entering appears in the top field you can tap on the city name or the .
PAGE 25
Previous Destinations Routing to a Previous Destination 1. From the Main Menu, tap the Previous icon. 2. Select the destination from the list of previous destinations. 3. A screen appears with the address of the selected location, the estimated time of arrival (ETA), the distance to travel, and the routing method (e.g. Fastest). 4. (optional) Tap Options if you want to change the routing method. 5.
PAGE 26
Creating a New Entry in Your Address Book by Entering an Address 1. From the Main Menu, tap the Address icon, and enter an address as described in “Entering an Address”. 2. When the screen appears with the address of the selected location, the estimated time of arrival (ETA), the distance to travel, and the routing method (e.g. Fast), tap Save. 3. Edit information: • Tap the Name field and use the keyboard to enter a name for the address book entry.
PAGE 27
OneTouch Menu In addition to Home Address, there are other icons in the OneTouch Menu. There are predefined bookmarks as well as user assignable bookmarks for searches and favorite destinations. They can be used for easy access of frequent destinations and to get local information when needed. Furthermore, you can assign POI search criteria to OneTouch icons. Saving an Address to a OneTouch Icon 1. Tap the button in the top right corner of the Map screen. The OneTouch menu appears. 2.
PAGE 28
Setting a Route to a OneTouch Icon With the OneTouch menu set up you can now go to a saved address or search. 1. Tap the button in the top right corner of the Map screen. 2. Tap one of the assigned OneTouch buttons. 3. If the assigned button is for a search, the list of POIs is displayed. Tap on the desired POI. The “Preview” icon at the bottom of the display allows you to step through the available POIs while viewing their location on the map. The “Near...
PAGE 29
Points of Interest (POI) The Magellan RoadMate receiver has preloaded POIs that can be used as a destination for a route. Selecting a restaurant or finding a gas station nearby is at your fingertips. Creating a Route to a POI by Category POIs are categorized into unique categories from gas stations to tourist attractions. Most, but not all categories are further organized into subcategories.
PAGE 30
Creating a Route to a POI by Name 1. From the Main Menu, tap the Points of Interest icon. 2. Tap the Search By Name button. 3. Spell the name of the POI to be used as the destination. You don’t need to enter the full name, but the more characters you enter, the easier it will be to find the exact POI you are searching for. Tap . 4. POIs near your current position are displayed. You can tap “Near” for different search criteria (Near Current Position, Near City, or Near Address). 5.
PAGE 31
Home Address Your most frequent destination can be entered and saved in the Magellan RoadMate as the Home Address for quick and easy access when you need to navigate there. This does not need to be your real home address. Choose any address you visit frequently. You can access it at any time with the first button of the OneTouch menu. Saving the Home Address These instructions only apply if you have never entered a home address. 1. Tap the button in the top right corner of the Map screen.
PAGE 32
Traveling on a Route Map Screen When a route has been calculated, it will be displayed on the Map screen in green with small arrows indicating the direction of travel. The top of the screen displays the name of the street that comes next in your Turn List together with its distance. If you are not in the city in which the next street is, the name of the city is displayed instead. As the route progresses, voice alerts will be used to prompt you of upcoming maneuvers.
PAGE 33
2. On the Main Menu, tap the cancel route icon. 3. Confirm that you want to cancel the route. Tap Yes. OR 1. Tap the OneTouch icon from the Map screen to display the OneTouch menu. 2. Tap the cancel route icon. 3. Confirm that you want to cancel the route. Tap Yes. Detouring off a Route 1. From the Map screen, tap Menu. 2. Tap the Detour icon. 3. Different detours are calculated using the same routing method that was used to create the route. The list of alternate routes is displayed. 4.
PAGE 34
Multi Destination Routes With the Magellan RoadMate you can create routes with more than one destination. Select one destination and create a single route first. Then turn it to a multi destination route by selecting additional destinations. Creating Additional Destinations with Go To Using the search functions of the Magellan RoadMate you can easily create a route with multiple destinations. 1. From the Main Menu, tap the Go To icon. 2.
PAGE 35
Saving a Multi Destination Route to Your Address Book Multi destination routes can be saved for later use from the address book. 1. From the Map screen, tap Menu. 2. Tap Trip Options. 3. Tap Edit Trip. 4. The Multiple Destination List is displayed. 5. Make changes as needed. 6. Tap . 7. Tap Save. 8. Tap Yes to save the route to your address book. 9. The Add To Address Book screen is displayed. Tap on the Name if you want to change it. 10. Tap 26 .
PAGE 36
Traffic Glossary RDS: Radio Data System. Infrastructure that broadcasts digital information on the FM band. TMC: Traffic Message Channel, one of the types of information that a Radio Data System can broadcast. Public TMC Service: In some countries, there is at least one TMC service provider that broadcasts Traffic information free of charge. The Magellan RoadMate automatically receives public TMC services, whichever country you are in. For the updated list of countries and providers, please, check www.
PAGE 37
“No Signal” is displayed while searching for traffic signals. Icon can also appear red, depending upon the state it was in when traffic signals were lost. Coupons and Offers Along the top of the POI Search Results and the Map display you will see a banner that displays coupons and offers from various merchants. (If during a search, the coupon will be pertinent to the category you are searching on.
PAGE 38
Bluetooth Please note that not all of the features of the Magellan RoadMate Bluetooth will work with all phones as features of cellular phones vary from manufacturer to manufacturer. Pairing your Bluetooth-ready Phone for the First Time Before you use the Bluetooth function of the Magellan RoadMate receiver you must pair your Bluetoothready phone to the RoadMate. A list of compatible phones can be found on the Magellan web site at www.magellangps.com/support.
PAGE 39
Enabling/Disabling Audible Maneuver Warning 1. Access the Bluetooth Settings screen. 2. Check Audible Maneuver Warning to turn it on; uncheck to turn it off. (When Audible Maneuver Warning is enabled you will hear a beep when a maneuver is needed and you are in the middle of a phone conversation.) Pairing Additional Bluetooth-ready Phone 1. Access the Bluetooth Settings screen. 2. Tap Pair Phone Now. 3. Follow the instructions above for pairing a phone. Importing Contacts 1.
PAGE 40
4. All the addresses in your address book are displayed with the phone icon displayed at the right for those addresses with phone number information. 5. Tap the dial icon on the right to begin placing the call. (The dial icon displayed will indicate if it’s a work, home or cell phone number.) 6. The Magellan RoadMate will begin calling the number. Speed Dialing Assigning a Phone Number to Speed Dialing 1. From the Map screen, tap the Bluetooth icon . 2. Tap Speed Dial. 3. Tap an Assign button. 4.
PAGE 41
1. Tap the Volume button. 2. Tap on the volume (top) slider to adjust the volume. 3. Tap on the microphone gain (bottom) slider to adjust the microphone gain.
PAGE 42
Settings With user Settings you can customize the Magellan RoadMate receiver to better suit your personal needs and preferences. Tapping the Back arrow Tap from any of the Setting screens saves your changes. Accessing System Settings 1. From the Main Menu screen, tap the Settings icon . 2. Tap System. Setting Languages 1. Access the System Settings menu (above). 2. Tap Languages. 3. Tap on the desired language. 4. Tap the back arrow . 5.
PAGE 43
Selecting Units of Measure Auto power is the duration of time that the Magellan RoadMate receiver remains idle before turning off automatically. 1. Access the System Settings menu (above). 2. Tap Units. 3. Tap on the desired unit of measure. 4. Tap the back arrow . Map Options Setting Auto Night Map Display Normally the map is displayed in vivid colors for daytime use and with dark tints for night use.
PAGE 44
Sound Setting Volume from Settings 1. From the Main Menu screen, tap the Settings icon. 2. Tap Sound. 3. Tap inside the volume slider bar to set the desired volume level. Muting the Sound 1. From the Main Menu screen, tap the Settings icon. 2. Tap Sound. 3. Checking Mute will mute all sounds. Turning off Button Sounds 1. From the Main Menu screen, tap the Settings icon. 2. Tap Sound. 3. Unchecking Button Sounds will turn off the audible indication that a button is tapped.
PAGE 45
Adding Features This option is used when purchasing an additional feature for your receiver that requires a code to authorize it. Check the Magellan web site periodically for new features, enhancements or even software updates. 1. From the Main Menu screen, tap the Settings icon. 2. Tap Add Feature. 3. Use the keypad to enter in the code you received. Traffic Enabling Traffic This option is used when you want to turn traffic off.
PAGE 46
Default System Settings Restoring All Default System Settings It is useful to set a GPS position if you are not receiving satellite information quickly due to travelling over 800 km/500 mi with the Magellan RoadMate receiver turned off. Setting the GPS position will allow the Magellan RoadMate receiver to compute which satellites are available and calculate the position more quickly. 1. From the Main Menu screen, tap the Settings icon. 2. Tap GPS Options. 3. Tap Set GPS Position.