Operating Guide

33
Default System Settings
Restoring All Default System Settings
It is useful to set a GPS position if you are not receiving satellite information quickly due to travelling over 800
km/500 mi with the Magellan RoadMate receiver turned off. Setting the GPS position will allow the Magellan
RoadMate receiver to compute which satellites are available and calculate the position more quickly.
1. From the Main Menu screen, tap the Settings icon.
2. Tap GPS Options.
3. Tap Set GPS Position.
Enter an address as you were selecting a destination.
Viewing Product Information
1. From the Main Menu screen, tap the Settings icon.
2. Tap Product Information.
(Note: Scroll down the page to view the Serial Number and Software Version.)
Trip Reporting
The Magellan RoadMate will continuously record your trips and give you a means of viewing details of the trip,
assigning a trip as a business trip and view a summary of all recorded trips.
Accessing the Trip Report
1. From the Map screen tap Menu.
2. Tap the Settings icon.
3. Scroll down to the second page and tap Trip Report.
Viewing Trip Details
1. Access Trip Report.
2. Tap on a trip from the list displayed.
3. The Trip Details screen is displayed.
4. To assign this trip as a business trip, check the Business box
in the upper right of the screen.
Viewing the Trip Summary Report
1. Access Trip Report.
2. Tap on the Summary Report button.
3. The Summary Report page is displayed showing total miles, total business miles and total time spent.
4. Tap on the Select Date Range button to select a start and finish date to view.