~AGELLAts • Magellan® RoadMate™ 760 The first time you use your Magellan RoadMate, or if you travel over 500 miles with the unit off, there may be a delay in receiving the initial satellite fix; depending on your position and the position of the satellites, this could take 15 minutes or more. Normal usage will receive the satellite fix much faster, but still may take several minutes.
in your car... --'- A> Take care when mounting the unit in your vehicle that it does not obstruct the driver's view of the road, interfere with the operation of the vehicle's safety devices such as air bags, or present a hazard to occupants of the vehicle should the unit be dislodged while driving. You assume the risks associated with damage to your vehicle or vehicle occupants as the result ofyour choices in mounting the unit.
eM~GELLA~ Magellan® RoadMate™ Basic Operation Instructions for the Magellan RoadMate 760
This document covers the basic operation of the Magellan RoadMate 760 Vehicle-Navigation System. The information provided here is enough to give you all the normal operating features for using this product. If you need additional information or if you require details on other functions, refer to the Reference Manual found on the compact disc (CD-ROM) supplied with your Magellan RoadMate.
Table of Contents Registration Magellan RoadMate Traveling to Europe with your Magellan RoadMate Magellan RoadMate (Front View) Magellan RoadMate (Rear View) Traveling with the Magellan RoadMate Tips on Signal Reception Where Is the Volume Control? Can the Voice Command be Repeated? How Do I Adjust the Contrast and Brightness? What About Driving at Night? Viewing the Guidance Screens ~ How Do I Read the Map screen? Changing the Map Zoom Levels How Can I See the Entire Route? How Can I See What the Next Mane
Registration Registering your product will ensure prompt, effective technical assistance and customer service and allow you to receive notIfication of product updates, new products, and other valuable information to help you make the most of your Magellan RoadMate Vehicle-Navigation System. To register your Magellan RoadMate, go to www.magellangps.com using your Web browser. Select the RegisterlLogin option from the list of menu items.
Magellan RoadMate Thank you for purchasing the Magellan RoadMate 760. We hope you will enjoy using your new vehicle-navigation system and encourage you to provide us with feedback. The Magellan RoadMate is amazingly simple to use. The easiest way to learn is to go to your car and let it work for you. But to get you started, here is a simple step-by-step overview of using your Magellan RoadMate. Raise Antenna Turn it on... Select User Select Destination ...and go.
Magellan RoadMate (Front View) 1 Power Button Press to turn the Magellan RoadMate on or off. 2 Volume Control Adjust to set the volume of the speaker. 3 Repeat Button Press to repeat the last spoken prompt. 4 Zoom In Button While viewing the map, press to zoom in on the center of the display. 5 Option Button Press to access the User Options menu. 6 Enter Button Press to confirm highlighted selections. 7 Cancel Button Press to stop the current function.
Magellan RoadMate (Rear View) 1 Speaker For audible maneuvering instructions. 2 Repeat Button Press to repeat the last spoken prompt. 3 Volume Control Adjust to set the volume of the speaker. 4 Antenna Rotate up when in use to receive signals from the GPS satellite network. 5 Compact Flash This compartment stores the compact flash memory card (for future applications) 6 Power/Data Connection Connection for power and data for the Magellan RoadMate.
Traveling with the Magellan RoadMate Tips on Signal Reception Your Magellan RoadMate receives signals from satellites to compute your location. The advanced technology used with the Magellan RoadMate allows it to receive these signals even in harsh conditions. However, there are a few things to keep in mind in order to get the strongest signal possible. • • • • Always raise the antenna unless using an external antenna (not included 1). The Magellan RoadMate will not work indoors or in a garage.
How Do I Adjust the Contrast and Brightness? The Magellan RoadMate has alight sensor on the front of the unit that detects changes in light levels and adjusts the brightness and contrast automatically. You also can adjust the brightness and contrast levels manually. To access the Contrast and Brightness menus, press the Option button (see page 2) and select Configuration. Select either Contrast or Brightness. The adjustment procedure for both is identical.
How Do I Read the Map screen? The Map screen is used most often when traveling and provid'es you with information about where you are and where you are going. POI Icon t --Position Cursor (points in the """.:::::iiiiiiiMII........~--directionyou are traveling) Next Maneuver ID-§-~-Next Direction of Travel and GPS Signal Strength tt Road Distance to Destination Direction of Destination Distance to Next Maneuver t By touching the POI icon on the screen, you can get information and route to it.
button twice to view the TrueView 3D screen. In split mode, the left half of the screen shows TrueView 3D, while the right half of the screen shows the map. You can also view TrueView 3D in full screen. For more information, please refer to the Reference Manual fou~d on the Documentation ·CD included with your Magellan RoadMate, When you are done viewing the TrueView 3D screen, press the View button to return to the Map screen, or wait a few moments and it will return automatically.
It is required that your PDA use the same IrDA protocol as the Magellan RoadMate. If an error occurs in transmission or protocol, an error message will be displayed. The Magellan RoadMate's IrDA protocol will work with PDAs using PocketPC® 2003, 2004, and Palm® OS Version 5 and above. Selecting a Destination The Magellan RoadMate has four different ways to select desti nations: Select Address fi nds an add ress in the data base; Address Book enables you to select addresses you have saved; Dining, ATM, Gas.
Next, enter the first few characters of the street name. In this example, we are looking for Denise Way. Using the keyboard, enter D-E-N and select OK (Do not enter prefixes such as "North" or "N", or suffixes such as "Ave" or "Road" in the street name). A list of possible streets from the database is displayed. Select the desired street name by touching it on the screen. Note: Some streets have a prefix or suffix like North or South and will also appear in the list of possible street names.
Select Dining, ATM, Gas... from the Select Destination menu. Next, you will need to indicate how you plan to access the name of the POI you are looking for. Spell Name: Use the keyboard to enter the first few characters of the name. After pressing OK, you will be given a list of all of the places stored in the data base that begi n with those characters. Select Category: This option enables you to select from a list of available POI categories.
How Do I Go To a Previous Destination? Once the Magellan RoadMate has calculated a destination, it stores that desti nation in you r Previous Desti nations list. Th is Iist is stored in the Address Book menu and contains the last 50 destinations you have routed to. Previous Destinations are not added to your Address Book automatically.
How Do I Go To an Address in My Address Book? The Magellan RoadMate 760 stores up to 200 street addresses for each user for quick and easy access. In addition, you can designate an address as a Favorite for even quicker access to places traveled to most often. For more information on Favorites, please refer to the Reference Manual found on the Documentation CD included with your Magellan RoadMate. From the Select Destination menu, select Address Book. From the Address Book menu, select List Addresses.
From the Select Destination menu, select Address Book. Select Trip (press the Trip button). Select New and give your trip a name. Select OK. Select Add. At this point you can add destinations using Select Address, Address Book, POls (Dining, ATM, Gas ... ), or Intersection. For this example, we will use the Address Book. Select Address Book. Next, select List Addresses. Select an address and then select Save. The address is added to your trip.
Select Save: [Trip name). Then, press the Cancel button to be taken back to the Trip menu. Select Guide Me and then select the trip. Select the first destination in the list you wish to route to. i:...................;.......................-..............................J Note: Selecting the second destination in the list will exclude the first destination, selecting the third destination in the list will exclude the first and second destinations, and so on.
Press the Option key and select Configuration. Then select Detour Options. Select the distance of the detour form the preprogrammed options, or enter a custom distance. Select the amount of time to wait before alerting you. Select Enable automatic detour and select Save. When traffic on the freeway slows down, the SmartDetour icon will flash on the Map screen. Touch the icon on the screen to re-ca Icu late the route. Can I Have a Password? Yes you can. Each user can set a password.
Magellan RoadMate POI Manager Software The following covers the basics of installing and using the Magellan RoadMate POI Manager software. For more information, please refer to the Reference Manual found on the Documentation CD included with your Magellan RoadMate. Installation Insert the Magellan RoadMate POI Manager CD into your computer's CD drive. The installation will begin automatically. Follow the onscreen instructions to install the POI Manager software.
Uploading POls to Your Magellan RoadMate When you have finished creating your ~Ols, click on the right arrow to move the PO I category into the tra nsfer window. Click on the Save POI button. A dialog box will appear, prompting you to save the POls to your hard drive or to your Magellan RoadMate. Select Magellan RoadMate and give the POI file a name. Click Save. The POls have been transferred to your Magellan RoadMate.
CONTACT INFORMATION If you need support for your Magellan RoadMate and you wish to contact Thales, the following information is provided so that you can direct your questions/comments to the proper person. Technical Support If you need technical assistance or "how-to" help, or if you have a technical question about the functionality of your Magellan product, please contact us on the Internet at www.magellangps.com or reach us by fax or by phone.
~~GELLAb 631239-01 A Thales Consumer Products 960 Overland Court San Dimas, CA 91773 USA Tel: 909 394 5000 Fax: 909 394 7050 www.magellangps.
Magellan® RoadMate™ Reference Manual Instructions for Operating the Magellan RoadMate 760
IMPORTANT SAFETY WARNINGS The Magellan RoadMate 760 is a vehicle-navigation aid designed to assist you in arriving at your selected destinations. When using the Magellan RoadMate, these safety rules must be followed to prevent accidents that can result in injury or death to yourself or others: • When driving, the need to view the display is minimal. Voice prompts will guide you to your destination. The driver should enter data or program the unit only when the vehicle is stopped.
Table of Contents Information ............................................................................................................................................. 1 About Satellite Navigation ..................................................................................................... 1 How Satellite Navigation Works .............................................................................................. 1 Line of Sight .................................................................
Table of Contents Selecting Destinations ........................................................................................................................... 31 Choosing the Route Method ................................................................................................. 32 Changing the Route Method ................................................................................................. 33 Cancelling a Planned Route ...............................................................
Table of Contents Route Preferences .......................................................................................................... 88 Detour Options .............................................................................................................. 89 Voice Options ................................................................................................................ 91 Menu Colors ...............................................................................................
Information Information About Satellite Navigation Global satellite navigation is an exciting technology, providing enhanced productivity and accuracy in a vast number of industries. It adds a new level of enjoyment and safety to a wide range of navigation, sports, and recreational activities.
Information using signal corrections from a network of ground stations and fixed-position satellites known as WAAS (Wide-Area Augmentation System). Throughout Europe a similar system, EGNOS (European Geostationary Navigation Overlay System), provides the same accuracy. In Asia, satellite navigation-signal correction is provided by MSAS (Multi-functional Transport Satellite-Based Augmentation System).
Information continuously review, correct, and improve upon their map data. We release new versions of our maps on a regular basis to reflect these changes. After processing the data, we test the compatibility of the map with our GPS devices to ensure that the products we release work properly on our GPS devices. We also beta-test our products to get customer feedback prior to release. GPS Maps and Your Safety Remember, your GPS device is an aid to navigation.
Magellan RoadMate Magellan RoadMate Front View 3 2 5 4 6 1 13 12 11 10 9 8 7 1 Power Button Press to turn the Magellan RoadMate on or off. 2 Volume Control Adjust to set the volume of the speaker. 3 Repeat Button Press to repeat the last spoken prompt. 4 Zoom In Button While viewing the map, press to zoom in on the center of the display. 5 Option Button Press to access the User Options menu. 6 Enter Button Press to confirm highlighted selections.
Magellan RoadMate Rear View 2 3 4 1 5 6 1 Speaker Used for audible maneuvering instructions. 2 Repeat Button Press to repeat the last spoken prompt. 3 Volume Control Adjust to set the volume of the speaker. 4 Detachable Antenna Rotate up when in use to receive signals from the GPS satellite network. 5 Compact Flash Compartment to store the compact flash memory card. 6 Power/Data Connector Connection for power and data for the Magellan RoadMate.
Magellan RoadMate Cradle Front View 1 2 1 Power/Data Connector Connection for power and data for the Magellan RoadMate. 2 Release Press to remove the Magellan RoadMate from the cradle. Cradle Side View 1 2 1 USB Connection Connect to your PC to upload Custom POIs or software updates. 2 Power Connection Plug into your vehicle or at home.
Installation Installation Take care when mounting the Magellan RoadMate in your vehicle, whether using the windshield mount or other mount, that it does not obstruct the driver’s view of the road. Make sure that the placement of the Magellan RoadMate and cable does not interfere with the operation of vehicle safety devices, such as air bags. You assume the risks associated with damage to your vehicle or vehicle’s occupants as a result of how you choose to mount the Magellan RoadMate.
Installation Plug the power cable into the cradle. Plug the cigarette lighter connector into an appropriate 12V receptacle in your car. Rotate the antenna upward. Installation is complete, and you are ready to turn the Magellan RoadMate on and go.
POI Manager POI Manager Overview The Magellan RoadMate 760 comes with Magellan RoadMate POI Manager Software. This allows you to add custom POIs to your Magellan RoadMate. You can add things such as friends’ houses and other favorite places that are not in the installed database. POIs are easier to search for than street addresses and show up on the Map screen. The POI Manager adds POIs based on Latitude, Longitude, and a name. Other information such as altitude and a description are optional.
POI Manager Longitude Conversely, longitude lines can be expressed by dividing Earth into vertical segments totalling 360 degrees. Starting at the Prime Meridian (which is The Royal Observatory in Greenwich, England), or zero degrees Longitude, lines are drawn in 10degree increments 180 degrees to the West and 180 degrees to the East. If your location is on the western hemisphere, you are at a West Longitude.
POI Manager Altitude Each location also must have an Altitude. Altitude is expressed by how far the point is above or below the level of the ocean, or Sea Level. For example, Los Angeles, California is about 300 feet above sea level. Death Valley, California is about 270 feet below sea level.
POI Manager Installation Insert the POI Manager CD into your PC’s CD drive. The setup application will begin automatically. If it does not, browse your computer’s CD drive and double-click on the setup.exe file. Select a default language for the Application. The Welcome screen will appear to begin the installation process. Choose a destination for the application. Select Next to use the default location, or select Browse to choose a custom destination.
POI Manager Next, choose a Program Folder to place the application icons. THe Magellan RoadMate POI Manager software will be installed. When it has finished, to can have the installer launch the application automatically, or deselect to exit without launching the application.
POI Manager Connecting Your Magellan RoadMate The standard cradle is equipped with ports for connecting the Magellan RoadMate to a personal computer and external power. When connecting to a personal computer, leave the Magellan RoadMate attached to the cradle, disconnect the vehicle power cable and remove the assembly (Magellan RoadMate and cradle) from the vehicle. Connect the small end of the USB cable to the USB port on the cradle and the large end to an available USB port on your personal computer.
POI Manager Once you have finished creating POI’s, select the category or categories you wish to upload and click on the right arrow to add them to the Save and Transfer window. Click on the Save button. You are given the option of saving the POIs either to your computer (for later transfer) or directly to your Magellan RoadMate. Select the Save to My Magellan RoadMate button. Give your POI file a name and click on Save.
POI Manager The POIs are uploaded to your Magellan RoadMate. To access the new POIs on your Magellan RoadMate, refer to page 81. Adding Multiple POIs The POI Manager software supports ASCII file format (.ASC,.CSV,.TXT); GPS Exchange file format (.GPS,.XML); Magellan Waypoint file format (.WPT,.RTE); and Garmin PCX5 Waypoint file format (.WPT,.RTE). Click on the Import POI File button. Select a POI file. Assign the POIs an icon and create a category. Click Open.
POI Manager Define the data separator. Click Next. Assign a title to each field. You must have a latitude, a longitude, and a name. Click Finish. If there are any errors in the data you can view them. Otherwise, click No. The POI file has been imported and is ready to upload to your Magellan RoadMate.
POI Manager Select the POI file and click the right arrow. Click the Save button. You are given the option of saving the POIs either to your computer (for later transfer) or directly to your Magellan RoadMate. Select the Save to My Magellan RoadMate button. Give your POI file a name and click on Save. The POIs are uploaded to your Magellan RoadMate. To access the new POIs on your Magellan RoadMate, refer to page 81.
Basic Operation Basic Operation Turning the Magellan RoadMate On Press the Power Button. If power is properly connected, a logo screen is displayed, followed by the Warning screen. Select the desired User. The Magellan RoadMate can be personalized for three different users. It will use the saved profile settings for the user that you select here. Either the Select Destination screen or the Resume Route screen will be displayed automatically.
Basic Operation Adjusting the Volume The volume control is located at the top of the Magellan RoadMate. Use the thumbwheel to set the volume of the speaker to a desired level. See “Rear View” on page 5. Repeating the Last Command If you missed the last verbal command, you can repeat it by pressing the Repeat button. The Repeat button is located on the top of the Magellan RoadMate. See “Rear View” on page 5. Inputting Text Characters Whenever you need to input names, street addresses, etc.
Basic Operation Numerical Characters (“123” Button) When available, pressing the 123 button brings up a keypad with the numeric characters shown here. What Is QuickSpell? The Magellan RoadMate uses QuickSpell technology to provide you with the fastest method possible to enter characters. QuickSpell eliminates the possibility of a misspelled word or looking for a city or street that is not in the loaded database.
Basic Operation Select the spacebar. When enough characters have been entered, the Magellan RoadMate will automatically display the list of cities; or, if you feel that enough characters have been entered, select OK. Use the Navigation key to scroll the list up or down and select “San Francisco, CA” from the list. If the list is still too long, press Cancel to return to the keyboard and continue entering characters. The list of items found in the database is limited to 100 items.
Traveling Traveling Guidance Information Screens The Magellan RoadMate has three screens you can use to assist you in travelling to your destination: the Map screen, the Maneuver List screen, and the TrueView 3D/Split TrueView screen. Map: When a new destination is selected and calculated, the Map screen is displayed. This screen displays a map of your surrounding area along with the planned route (if calculated) and information about the route.
Traveling Map Screen The Map screen is the most commonly used screen in the Magellan RoadMate and provides you with detailed information about where you are and where you are going.
Traveling Maneuver List Screen The Maneuver List screen can be viewed only after a route has been calculated. From the Map screen, press the View button to bring up a list of all of the maneuvers along the route. When you are done viewing the Maneuver List screen, press the View button twice to return to the Map screen, or wait a few moments and it will return automatically.
Traveling In split mode, the left half of the screen shows TrueView 3D, while the right half of the screen shows the Map. Map with Planned Route Next Maneuver Direction of Travel and GPS Signal Strength Distance to Destination Distance to Next Maneuver Estimated Time to Destination Direction of Destination Detouring from the Planned Route If you exit the planned route, the Magellan RoadMate will get you back on course in one of two ways. 1.
Traveling The trip will be recalculated, excluding the selected maneuver. This calculation is done using the same Route Method that was chosen originally. After the route is recalculated, the Map screen is displayed. Displaying Information About Your Present Location Anytime that you want to view information about your present location you can press the Locate button.
Traveling The information about your location is displayed. Select Edit Name and/or Edit Information and use the keypad to assign a name to the location and other information about it. If the point you are saving is off-road, the nearest road information will be used. When you have finished, select Save. The location is saved to your Address Book and you are returned to the Locate screen.
Traveling The Magellan RoadMate will calculate a new route to the selected POI from your current position. When you have arrived at the new destination, you will be prompted to resume guidance to your original destination. Select Resume. The Magellan RoadMate will calculate the route to your original destination using the Route Method previously selected.
Traveling Select Route. The Magellan RoadMate will recalculate the alternate route to your destination.
Selecting Destinations Selecting Destinations Search by City Search by State Previous Destinations Previous City Favorites Select Address List Addresses Address Book Spell Name Select Category Create New Entry Trip Planner Custom POIs Search by City Dining, ATM, Gas...
Selecting Destinations Choosing the Route Method Every route is calculated based on the Route Method criteria selected. Every time a new destination is selected, the Magellan RoadMate prompts you for the method that will be used to calculate the route. Shortest Time: This selection calculates a route that should take the least amount of time using speed limits and other information in the database. Other factors, such as traffic conditions, cannot be used in the calculation of shortest time.
Selecting Destinations Changing the Route Method While viewing the Map screen, the Maneuver List screen, or the TrueView 3D screen, press the Cancel button. Select Route. Select the new Route Method. The route will be re-calculated using the new Route Method chosen and the Map screen will be displayed. Press the View button to see the Maneuver List with the new route.
Selecting Destinations Cancelling a Planned Route While viewing the Map screen, the Maneuver List screen, or the TrueView 3D screen, press the Cancel button. Select Yes to cancel the route and display the Select Destination screen. Select No returns the display to the last viewed screen.
Selecting Destinations Selecting a Destination Using Select Address A destination can be created by entering the street address that you want to go to. This address is not automatically added your Address Book but is saved to your Previous Destinations list. You have three options, Search By City, Search By State, or Previous City. Use Search By City when you know the city that the address can be found in. Use Search By State when you don’t know, or are unsure of the city name.
Selecting Destinations Use the Navigation key to scroll the list up or down (if necessary) and select the desired street. Enter the street address. The acceptable range of numbers is displayed at the top of the screen. Select Done. Select the desired Route Method. The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed. Search By State From the Select Destination screen, select Street Address. Select Search By State.
Selecting Destinations Enter the first few characters for the state and select OK. Select the state. Enter the first few characters for the name of the street and select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired street. Select the city from the list of cities displayed. (These are all of the cities in your loaded database that have the street name you selected.) Enter the street address.
Selecting Destinations Select the desired Route Method. The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed. Previous City From the Select Destination screen, select Street Address. Select Previous City. Select the city from the list. Enter the first few characters for the name of the street and select OK.
Selecting Destinations Use the Navigation key to scroll the list up or down (if necessary) and select the desired street. Enter the street address. The acceptable range of numbers is displayed at the top of the screen. Select Done. Select the desired Route Method. The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed.
Selecting Destinations Selecting a Destination Using the Address Book The Address Book can store up to 200 addresses for each of the three users you have available.
Selecting Destinations The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed. Saving a Previous Destination to the Address Book From the Select Destination screen, select Address Book. Select Previous Destinations. Use the Navigation key to scroll the list up or down (if necessary) and select the desired previous destination. Select Edit. The top line (Name) and the bottom line (Information) can be edited. The address cannot be changed.
Selecting Destinations When you have finished making changes, select Save. The address is saved to the Address Book. The Previous Destination screen is displayed to continue the routing to the previous destination. Select Route. Select the desired Route Method. The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed. Deleting A Previous Destination From the Select Destination screen, select Address Book. Select Previous Destinations.
Selecting Destinations Use the Navigation key to scroll the list up or down (if necessary) and select the desired previous destination. Select Delete. A dialog box will appear to confirm your selection. Select Yes. The Previous Destination is deleted from the list. Favorites From the Select Destination screen, select Address Book. Select Favorites.
Selecting Destinations Use the Navigation key to scroll the list up or down (if necessary) and select the destination from the list of addresses. Select Route. Select the desired Route Method. The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed. Editing a Favorite From the Select Destination screen, select Address Book. Select Favorites.
Selecting Destinations Use the Navigation key to scroll the list up or down (if necessary) and select the desired previous destination. Select Edit. The top line (Name) and the bottom line (Information) can be edited. The address cannot be changed. Select the line you want to modify. Use the keypad to enter the desired text and select OK. When you have finished making changes, select Save. The address is saved to the Address Book.
Selecting Destinations The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed. Deleting A Favorite From the Select Destination screen, select Address Book. Select Favorites. Use the Navigation key to scroll the list up or down (if necessary) and select the desired previous destination. Select Delete. A dialog box will appear to confirm your selection. Select Yes.
Selecting Destinations The Previous Destination is deleted from the list. List Addresses From the Select Destination screen, select Address Book. Select List Addresses. Use the Navigation key to scroll the list up or down (if necessary) and select the destination from the list of addresses. Select Route. Select the desired Route Method.
Selecting Destinations The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed. Editing an Address From the Select Destination screen, select Address Book. Select List Addresses. Use the Navigation key to scroll the list up or down (if necessary) and select the desired previous destination. Select Edit. The top line (Name) and the bottom line (Information) can be edited. The address cannot be changed. Select the line you want to modify.
Selecting Destinations When you have finished making changes, select Save. The address is saved to the Address Book. The Address screen is displayed to continue editing or you can route to the selected address. Select Route. Select the desired Route Method. The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed. Deleting an Address From the Select Destination screen, select Address Book. Select List Addresses.
Selecting Destinations Use the Navigation key to scroll the list up or down (if necessary) and select the desired previous destination. Select Delete. A dialog box will appear to confirm your selection. Select Yes. The Previous Destination is deleted from the list and you are returned to the Address Book screen. Create New Entry – Search by City From the Select Destination screen, select Address Book. Select Create New Entry.
Selecting Destinations Select Search by City. Enter the first few characters in the city name and select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired city. Enter the first few characters for the street name and select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired street. Enter the street address. The acceptable range of numbers is displayed at the top of the screen. Select Done.
Selecting Destinations The top line (Name) and the bottom line (Information) can be edited. The address cannot be changed. Select the line you want to modify. Use the keypad to enter the desired text and select OK. When you have finished making changes, select Save. You are taken back to the Address Book screen. Create New Entry – Search by State From the Select Destination screen, select Address Book. Select Create New Entry.
Selecting Destinations Select Search by State. Use the keypad to enter the first few characters for the state and select OK. Select the state. Enter the first few characters for the street name and select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired street. Use the Navigation key to scroll the list up or down and select the desired city. (These are all of the cities in your loaded database that have the street name you selected.
Selecting Destinations Enter the street address. The acceptable range of numbers is displayed at the top of the screen. Select Done. The top line (Name) and the bottom line (Information) can be edited. The address cannot be changed. Select the line you want to modify. Use the keypad to enter the desired text and select OK. When you have finished making changes, select Save. You are taken back to the Address Book screen.
Selecting Destinations Select Create New Entry. Select Previous City. Use the Navigation key to scroll the list up or down (if necessary) and select the desired city. Enter the first few characters for the street name and select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired street. Enter the street address. The acceptable range of numbers is displayed at the top of the screen. Select Done.
Selecting Destinations The top line (Name) and the bottom line (Information) can be edited. The address cannot be changed. Select the line you want to modify. Enter the desired text and select OK. When you have finished making changes, select Save. You are taken back to the Address Book screen. Trip Planner – New From the Select Destination screen, select Address Book. Select Trip (Trip button).
Selecting Destinations Select New. Use the keypad to enter a name for the new trip and select OK. From the pop-up menu, select Add. From the Select Trip Planner Address screen, select the method for adding a destination to your trip: Map (Map button) will add a destination by selecting a point on the map; Select Address will add a destination from a new address; Address Book will add a destination from a previous destination, Address Book, or favorites; Dining, ATM, Gas...
Selecting Destinations Select the trip to optimize. Select Optimize. The destinations are sorted from closest to farthest from you current location. Select Save. Trip Planner – Guide Me From the Select Destination screen, select Address Book. Select Trip (Trip button).
Selecting Destinations Select GuideMe. Select the Trip. Select the first destination in the list you wish to route to. Note: Selecting the second destination in the list will exclude the first destination, selecting the third destination in the list will exclude the first and second destinations, and so on. Select the desired Route Method. The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed.
Selecting Destinations Select the trip to edit. Select the destination you wish to delete, and select Delete from the pop-up menu. Select the destination you wish to change, and select Move Up from the pop-up menu. When you have finished, select Save and you are returned to the Trip Planner screen. Trip Planner – Delete and Rename From the Trip Planner screen, select Delete, Rename. Select Delete.
Selecting Destinations Select the trip you wish to delete. A dialog box will appear to confirm your selection. Select Yes. The trip has been deleted. Select Rename. Select the trip to renamed. Use the backspace key to delete the old name; then, enter the new name for the trip. When you have finished, select OK.
Selecting Destinations The trip has been renamed.
Selecting Destinations Selecting a Point of Interest as a Destination Points of Interest (or POIs) are commercial or recreational locations, landmarks, or services that are preloaded into the Magellan RoadMate database. There are over 6,500,000 POI’s in the database, which range from restaurants, parks, gas stations, and banks, to schools and police stations, and more. The purpose of the POI database (accessed through the Dining, ATM, Gas...
Selecting Destinations Select the desired Route Method. The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed. Selecting List by City will list the POIs matching the name you entered within a selected city. Select List by City. Enter the name of the city you wish to search. Use the Navigation key to scroll the list up or down (if necessary) and select the desired city.
Selecting Destinations Select the desired Route Method. The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed. Selecting Select Category enables you to list all of the POIs in the selected category. Select Select Category. Use the Navigation key to scroll the list up or down and select the desired POI category. Use the Navigation key to scroll the list up or down (if necessary) and select the desired POI.
Selecting Destinations The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed. Select Category From the Select Destination screen, select Dining, ATM, Gas... Select Select Category. Select the POI category. Selecting Nearest will list the POIs matching the name you entered from closest to farthest. Select Nearest. A list of all the POI’s in the selected categories nearest to your current position is displayed. Select the POI from the list.
Selecting Destinations Select the desired Route Method. The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed. Selecting List by City will list the POIs matching the name you entered within a selected city. Select List by City. Enter the name of the city you wish to search from. When you are finished, select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired city.
Selecting Destinations Select the desired Route Method. The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed. Selecting Spell Name will list the POIs matching the name you entered. Select Spell Name. Enter the name of the POI. When you are finished, select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired POI. Select the desired Route Method.
Selecting Destinations The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed. Custom POIs Please refer to page 14 for information on creating and loading Custom POIs. From the Select Destination screen, select Dining, ATM, Gas... Select Custom POIs. Select the category. If the POI list has more than 15 returns, you can further narrow the search by selecting either Nearest or Spell Name. Select the desired POI from the list.
Selecting Destinations Select the desired Route Method. The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed.
Selecting Destinations Selecting an Intersection as a Destination An intersection of two streets can be used as a destination for your trip. The search for the intersection can be done whether or not you know the city. If you know the city, you can start there; if you are unsure of the city, you can start with the state. Search by City From the Select Destination screen, select Intersection. Select Search by City. Enter the first few characters for the city and select OK.
Selecting Destinations Use the Navigation key to scroll the list up or down and select the first street from the list. Enter the first few characters for the second street and select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the second street from the list. Select the desired Route Method. The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed.
Selecting Destinations Select Search by State. Enter the first few characters for the state and select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the state from the list. Enter the first few characters for the first street and select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the first street from the list. Enter the first few characters for the second street and select OK.
Selecting Destinations Use the Navigation key to scroll the list up or down (if necessary) and select the second street from the list. Select the desired Route Method. The Magellan RoadMate will calculate the route. When the calculations are complete, the Map screen will be displayed. Previous City From the Select Destination screen, select Intersection. Select Previous City. Use the Navigation key to scroll the list up or down (if necessary) and select the desired city.
Selecting Destinations Enter the first few characters for the first street and select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the first street from the list. Enter the first few characters for the second street and select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the second street from the list. Select the desired Route Method. The Magellan RoadMate will calculate the route.
Options Options The Options menu of the Magellan RoadMate enables you with enhanced features to customize your Magellan RoadMate. Additionally, it provides features to assist you in learning how to operate the most common functions and in contacting a Support Representative should you need more detailed assistance. The Trip Computer displays useful information about your trip that can be saved for future reference.
Options Trip Computer The Trip Computer is a valuable tool for recording the mileage and time spent driving while on business or vacation. The information for the trip can be saved and viewed at any time, providing you easy access to information on your current trip, as well as previous trips. Current Trip When you begin a new trip and you need to record the information, access the Trip Computer.
Options While the Trip Computer is in a “Stopped” state, select Start to continue recording the current trip or select reset to begin a new trip. Saving the Current Trip Report When you have finished with your trip, you can save the information for later viewing. Select Save at any time. Use the keypad to enter a name for the Trip Report and select OK when you are finished. Resetting the Trip Computer Before starting a new trip that you want to record, you need to reset the Trip Computer first.
Options The saved Trip Report is displayed. Press the Cancel button when you are finished to view the trip and return to the Trip Computer screen. Deleting a Trip Report Select the Trip Report to be deleted. Select Delete. The trip is deleted and you are returned to the Trip Computer screen.
Options Configuration The configuration options can be set differently for each user. From any screen, press the Option button and select Configuration. POI Selection From the POI Selection menu, you can choose which icons to display on the Map screen. For a list of POI Categories, see “POI Categories” on page 112. Select POI Selection. Select Mark All to display all POI icons on the Map screen. Select Clear All if you wish not to have any POI icons displayed on the Map screen.
Options Custom POIs The Custom POI menu enables you to select POIs previously loaded into your Magellan RoadMate using the Magellan RoadMate POI Manager software. See “Application” on page 14. The instructions following instructions are assuming that you have loaded one or more POIs into your Magellan RoadMate. Select Custom POIs. Select Select a POI File. Use the Navigation key to scroll the list up or down (if necessary) and select a POI file.
Options When you have finished, press the Cancel button to return to the Custom POIs menu. You can also be alerted when you approach a custom POI. The Set Alarm function works for Custom POIs only and only if the POI has been selected to show on the Map screen. Select Set Alarms. Again, you can select all, none, or individual POIs to have an alert set. Select Mark All to set an alert for all custom POI icons on the Map screen.
Options The Detection Angle is set to alert you when you are within so many degrees of the POI. Select Detection Angle. Use the numeric keypad to enter the number of degrees in which to set the alert. When you have finished, select OK.
Options The First Warning is set to alert you when you are within a certain number of feet from the POI. Select First Warning. Use the numeric keypad to enter the number of feet in which to alert you. When you have finished, select OK.
Options The Last Warning is set as a final alert when you are within a certain number of feet from the POI. Select Last Warning. Use the numeric keypad to enter the number of feet in which to alert you. When you have finished, select OK. When you have set the parameters as you like, select Save.
Options Map Options Map Options enable you to determine the behavior of the Map while you are driving. Select Map Options. With Map Smart selected, the Map screen will automatically switch to the Maneuver List and/or the TrueView 3D screen when applicable. That is, when the satellite signal is lost for more than 30 seconds, the Maneuver List will be displayed so that you can still be guided to your destination. Also, when you are one-half mile from the next maneuver, the TrueView 3D screen is displayed.
Options Heading Up sets the map display so that the direction of travel is always at the top of the screen. North Up sets the map display so that North is always at the top of the screen. Select Miles or Kilometers as the unit of measure for distance. Select Map Color Select Select Map Color. With Automatic Night Mode enabled, the Magellan RoadMate will switch between a Day screen and a Night screen based on sunrise and sunset times for your current location.
Options Select from nine available color schemes: When you have finished, select Save and you will be returned to the Configuration menu. Route Preferences Route Preferences enable you to set parameters for the Magellan RoadMate to follow when calculating a route. Select Route Preferences. Avoid Toll Roads instructs Magellan RoadMate to avoid known toll roads when calculating a route.
Options Automatic Re-Route will cause the Magellan RoadMate to try up to three times to automatically re-route to the destination when it has detected that the vehicle has deterred from the calculated route. Detour Options The Magellan RoadMate comes equipped with SmartDetour. If you are driving on the freeway with SmartDetour enabled and your speed drops below 15 MPH, you may press the detour icon on the Map screen in order for the Magellan RoadMate to calculate an alternate route around traffic.
Options Next, select the amount of time the Magellan RoadMate will wait before alerting you to recalculate the route. Select the Time button. Enter the number of minutes and select OK. Select Enable automatic detour. When you have finished, select Save. When you encounter traffic, and the set time has elapsed, the Detour icon will flash on the Map screen. Touch the icon on the screen to have the Magellan RoadMate calculate the detour.
Options Voice Options From the voice options menu, you can select to have your voice prompts announced in either a male or a female voice in the language currently enabled (refer to “Language” on page 95). Additionally, you can also have the Magellan RoadMate speak the street name of the next maneuver. Select Voice Options. Choose Male Voice or Female Voice. If you wish to have the street names spoken, enable Announce street name. When you are finished, select Save.
Options Menu Colors You can change the color of the menu screens by selecting one of four color schemes. Select Menu Colors. Select the desired color scheme. When you have finished, select Save. Contrast Contrast determines the level of difference between light and dark colors. Select Contrast. Select the left arrow to decrease the amount of contrast, or select the right arrow to increase the amount of contrast. When you are finished, select Save.
Options Brightness Brightness determines how bright or dim the level of the display will be. Select Brightness. Select the left arrow to decrease the amount of brightness (make the display darker), or select the right arrow to increase the amount of brightness (make the display lighter). When you are finished, select Save. Display Options The Magellan RoadMate can be configured to automatically adjust the display.
Options Select Auto Power Off. When you are finished, select Save. Tone Options As you approach a maneuver, an audible alert sounds to let you know to make the maneuver. Select Tone Options. Select either Bell, Chime, or Beep. When you have finished, select Save.
Options Language You can select to have the menus displayed in one of 12 languages. Also, audible voice prompts will be spoken in the selected language. Select from US English, UK English, French (Français), German (Deutsch), Dutch (Nederlands), Italian (Italiano), Spanish (Español), Danish (Dansk), Norwegian (Norsk), Finnish (Suomi), Swedish (Svenska), and Portuguese (Português). Select Language. Use the Navigation key to scroll the list up or down and select the desired language.
Options Touch Screen Test Touch Screen Test checks that the touch screen is calibrated and accurate. Keypad Test Keypad Test verifies proper operation of the keypad. Audio Test checks that the speaker is working correctly. GPS Status monitors the satellite signal. For more information on the GPS Status screens refer to “GPS Status Screen” on page 109. Initialize GPS resets the unit and reacquires the satellite signal.
Options Set GPS Position Set GPS Position enables you to manually set the location of the Current Position icon. If you have travelled a long distance with the unit off, it may take some time for the unit to reacquire a satellite signal. By manually setting the position of the unit, you are telling the unit where you are and will speed up the satellite signal acquisition. Select Set GPS Position. Use the keypad to enter the city name.
Options Go to the Map screen. Your current position is now set to the address you entered. Simulator Mode In Simulator Mode, you can demonstrate the capabilities of the Magellan RoadMate without actually driving. In order for the simulation to work, you must set a route first. Select Simulator Mode. Set the speed variance of the simulation: x1 will “drive” at normal speed using known speed limits; x1.5 will “drive” at one and a half times normal speed; x2 will “drive” at two times normal speed.
Options Select Edit User Name. Use the keypad to delete the existing user name and enter the desired name for the selected user. When you have finished, select OK and you will be returned to the Configuration menu. Next time you start your Magellan RoadMate, the name you entered will be displayed. In addition, configurable items that are user specific will display the user name in the menu. Map Regions The Magellan RoadMate 760 comes preloaded with North American and European map data.
Options Select Europe and then select Unlock. Select Code. Use the keypad to enter the unlock code. When you have finished, select OK. Select Unlock. The database is unlocked. Select OK. Select Europe and then select Switch. Note: If you have a Compact Flash (CF) card inserted, you must remove it before switching maps.
Options Select Yes. After the unit has powered down, turn the unit back on and the new map will begin loading. When it has finished, you will have access to the European maps. Also note that the user interface will be slightly different. Safety Lockout The Safety Lockout feature disables any user input while the vehicle is in motion. While this feature can be disabled, the driver should not operate the unit while the vehicle is in motion. Select Safety Lockout.
Options Use the keypad to enter a password of up to six characters. You can use letters or numbers, or a combination of both. When you have finished, select OK. Select Activate to enable the password. When you have finished, select Save. Automatic Volume The Magellan RoadMate can be set to automatically increase the volume when the vehicle exceeds 45 MPH in order to compensate for road noise. Select Automatic Volume. Select the number increment by which to increase the volume.
Options Select Enable. When you have finished, select Save. Backup and Restore The Magellan RoadMate 760 has the capability to back up your information (Address Book, Previous Destinations, etc.) to a Compact Flash (CF) card (not included). When a CF card is inserted in the CF card slot (see “Rear View” on page 5), the information will automatically back up when you power down the unit. In the event that you need to reset your unit, you can also restore the information back to the unit.
Options A dialog box will appear, stating that your information is being restored, and the unit will shut off automatically. Turn the unit back on, and your information and preferences are restored.
Options Tutorial The Magellan RoadMate has a built-in Tutorial that you can view or refer to anytime the Magellan RoadMate is turned on. Do not use the tutorial while you are driving. If you are operating the vehicle, please come to a complete stop before reviewing the tutorial topics. From any screen, press the Option button and select Tutorial. Select the desired topic. The tutorial includes verbal narration to further aid you in understanding the selected topic.
Options Help Select Help. Customer Support phone numbers for United States, Canada, and Europe are displayed. See page 107 for more information.
Contact Information Contact Information If you need support for your Magellan RoadMate and you wish to contact Thales, please use the following information to direct your questions/comments to the proper person. Technical Support If you need technical assistance or “how-to” help, or if you have a technical question about the functionality of your Magellan product, please contact us on the Internet at www.magellangps.com or reach us by fax or by phone.
Appendix A Appendix A Adding Addresses from an IrDA-Equipped Device The Magellan RoadMate comes equipped with an IRDA receiver (see “Front View” on page 4). With this, you can “beam” addresses from your Palm or other equipped device. Do not attempt to transfer addresses while you are driving, at a stop, or in traffic. Address transfer should be done only while the vehicle is parked. Make sure the Magellan RoadMate is turned on and at the Select Destination screen.
Appendix B Appendix B GPS Status Screen GPS STATUS Screen Structure-first page CH 01 02 03 04 05 06 07 08 09 10 11 12 13 14 PRN d1 d1 d1 d1 d1 d1 d1 d1 d1 d1 d1 d1 d1 d1 AZ d2 d2 d2 d2 d2 d2 d2 d2 d2 d2 d2 d2 d2 d2 EL d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 SNR d4 d4 d4 d4 d4 d4 d4 d4 d4 d4 d4 d4 d4 d4 FRQ d5 d5 d5 d5 d5 d5 d5 d5 d5 d5 d5 d5 d5 d5 U/N c1 c1 c1 c1 c1 c1 c1 c1 c1 c1 c1 c1 c1 c1 c2 c2 c2 c2 c2 c2 c2 c2 c2 c2 c2 c2 c2 c2 d6 d7 It is ordered by the channel number from 1 to 12.
Appendix B 17 ILL_DEFINED_2D_MATRIX 2X2 matrix can not be inverted in 2D fix 20 NO_SAT_TIME no satellite time 23 NOT_ENOUGH_SATS no enough satellite for 2D or 3D fix 24 CANNOT_SELECT_FIX_TYPE 30 VELOCITY_2D_ONLY 2 satellite fix only for velocity, no position fix 31 BAD_VELOCITY_PDOP 50 too big pdop for velocity 32 TOO_MANY_SATS_FOR_2D_VEL there are 4 or more satellites, but 2D fix provided 51 WRONG_NUMSAT number of satellite for fix > 12 or less 2 56 LOOP_3D_NOT_CONVERGING 3D initial fix is not co
Appendix B Typical GPS STATUS Screen Display First Page CH 01 02 03 04 05 06 07 08 09 10 11 12 13 14 PRN 27V 03E 13e 20e 31v 01V 28V 08V 02V 84 10 72 134 122 AZ 311 078 079 175 119 120 220 282 046 255 325 105 255 105 EL 54 29 81 06 34 53 13 29 27 12 06 13 12 13 SNR 334 135 204 90 179 316 152 182 173 0 47 34 50 63 Second Page Heading 0Speeding 0.0 m/s Current Lat: 34.10939 N Current Long:117.82599 W Current altitude 255 TTFF 116s #Satellite (U/T) 11/12 PDOP 2.3 VDOP 1.7 TDOP 0.0 HDOP 1.
Appendix C Appendix C POI Categories The Magellan RoadMate POI database has 37 different categories.
Appendix C Appendix D Public Buildings Libraries, museums, and government buildings Rest Area Rest stops along major highways Shopping Malls and other retail stores Ski Resorts Most major ski resorts Sports & Recreation Stadiums, parks, lakes Tourist Attraction Places most visited by tourists Transportation Bus and train stations Winery Vinyards and tasting locations Worship Churches, temples, mosques When selecting restaurants, you can further narrow the search by cuisine type such as Fre
Appendix D Specifications DImensions: 3.3” x 6.6” x 1.5” 8.4cm x 16.8cm x 3.8cm Weight: 13 oz. 368g Display: 3.8” anti-glare TTF color touch screen, 2.25” x 3.
THALES CONSUMER PRODUCTS GPS RECEIVER END USER SOFTWARE LICENSE All Thales global positioning system (GPS) receivers are navigation aids, and are not intended to replace other methods of navigation. Purchaser is advised to perform careful position charting and use good judgment. READ THE USER GUIDE CAREFULLY BEFORE USING THE PRODUCT. 1.
4. LIMITATION OF IMPLIED WARRANTIES Except as set forth in item 1 above, all other expressed or implied warranties, including those of fitness for any particular purpose or merchantability, are hereby disclaimed AND IF APPLICABLE, IMPLIED WARRANTIES UNDER ARTICLE 35 OF THE UNITED NATIONS CONVENTION ON CONTRACTS FOR THE INTERNATIONAL SALE OF GOODS.
CAUSED BY NEGLIGENCE OR OTHER FAULT OFTHALES OR NEGLIGENT USAGE OF THE PRODUCT. IN NO EVENT WILL THALES BE RESPONSIBLE FOR SUCH DAMAGES, EVEN IF THALES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some national, state, or local laws do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. 7.
THALES CONSUMER PRODUCTS PRODUCTS LIMITED WARRANTY All Thales global positioning system (GPS) receivers are navigation aids, and are not intended to replace other methods of navigation. Purchaser is advised to perform careful position charting and use good judgment. READ THE USER GUIDE CAREFULLY BEFORE USING THE PRODUCT. 1.
Except as set forth in item 1 above, all other expressed or implied warranties, including those of fitness for any particular purpose or merchantability, are hereby disclaimed AND IF APPLICABLE, IMPLIED WARRANTIES UNDER ARTICLE 35 OF THE UNITED NATIONS CONVENTION ON CONTRACTS FOR THE INTERNATIONAL SALE OF GOODS. Some national, state, or local laws do not allow limitations on implied warranty or how long an implied warranty lasts, so the above limitation may not apply to you. 5.
IN NO EVENT WILL THALES BE RESPONSIBLE FOR SUCH DAMAGES, EVEN IF THALES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some national, state, or local laws do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. 7.
Before installing the windshield mount, use the alcohol pad (supplied) to clean the suction cup and the area of the windshield where you will place the windshield mount. Avant dJinstaller Ie support de fixation pour pare-brise, nettoyez la zone de son emplacement ainsi que la ventouse avec Ie tampon alcoolise (fourni).
Reeister your MaJ1ellan product on the World Wide WebD Go to www.maQellanQPs.com for details [Fran~ais] Enreqistrez votre produit Maqellan sur Internet. Rendez-vous sur \J\/\NW.maQellan~ps.com pour en savoir plus. [Espanol] Re~istre su producto Ma~ellan a traves de Internet. Vaya a vvvvw.ma~ellanQPs.com para mas detalles. [Deutsch] ReQistrieren Sie Ihr Ma~ellan-Produkt im Internet. Gehen Sie zu \N\tVW.ma~ellanQPs.com. [Italiano] ReQistrazione del prodotto MaQellan nel World Wide Web. Indirizzo: www.
c:::M~GELLA~ Any Questions? Dear Customer, Congratulations! Thank you for purchasing your Magellan® RoadMate™ portable vehicle navigation system. Your Magellan RoadMate has been manufactured with the greatest care and highest standard of quality for your satisfaction. We would like to ensure that you have the best possible experience using your new GPS system.
THALES NAVIGATION MAGELLAN ROADMATE 700 PRODUCT SOFTWARE LICENSE IMPORTANT - READ CAREFULLY BEFORE USING THE SOFTWARE By clicking the acceptance button or using the pre-loaded software, you are agreeing to be bound by all of the terms and conditions of this software license agreement ("Agreement") which is provided with the pre-loaded software program and data (together the "Software") including, without limitation, the use restrictions, warranty disclaimer and limitation of liability set forth therein.
Licensor and its th ird-party su ppl iers (and thei r th ird-party su ppl iers) and their officers, employees and agents from and against any claim, demand or action, irrespective of the nature or the cause of the claim, demand or action, alleging loss, costs, expenses, damages or injuries (including injuries resulting in death) arising out of the use or possession of the Software. The Iicense is effective unti I term inated.
Some states do not allow the exclusion of limitation of implied warranties or liability for incidental or consequential damages, so the above limitations or exclusions may not apply to you. U.S. Government Restricted Rights: The software is provided with Restricted Rights or Limited Rights. Use, duplication or disclosure by the U.S. Government is subject to the restrictions as set forth in subparagraphs (b)(3) and (c)(I)(ii) of the Rights in Technical Data Noncommercial Items clause at DFARS 252.
H F2ATOO 1300 631177 A
~~GELLA~ Please check the Magellan web site, www.magellangps.com. for accessories available for your Magellan RoadMate. Accessories can be purchased at the Magellan Online Store, by phone or from your local dealer. Magellan Online Store www.magellangps.com/en/store/ Direct your web browser to www.magellangps.com/en/store/ to enter the Magellan Online Store. There you will find information about accessories that work with your new Magellan RoadMate.
Magellan Extended Warranty Program Take advantage of this great opportunity to extend the life of your Magellan ® product warranty for two additional years l . The Magellan Extended Warranty Program provides you with a single point of contact for reliable end-to-end service and avoids expensive time and material repairs.
MAGELLAN PRODUCTS EXTENDED WARRANTY TERMS AND CONDITIONS This Extended Warranty is an agreement between Thales Navigation, Inc., 471 El Camino Real, Santa Clara, CA 95050, which is the obligor and administrator, and you, the purchaser. This document, together with the Thales Navigation Magellan Products Limited Warranty ( Limited Warranty ) that accompanied the products when purchased, sets forth the entire Extended Warranty and may not be modified except by written agreement by Thales Navigation.
