Magellan® RoadMate® 66xx Series GPS Navigator & Dash Cam Combo User Manual
Safety. This Magellan device is a dashboard camera and recording device designed to assist you in recording videos, taking photos, and managing the content stored on the device. Please check with your state or local law enforcement for applicable regulations regarding mounting to the windshield. Go to the Magellan store at magellanGPS.com for alternate mounting solutions. The driver should enter data or program the Magellan receiver only when the vehicle is stopped.
Table of Contents. Getting To Know Your RoadMate...............................................................4 Front View.................................................................................................................................4 Rear View..................................................................................................................................5 Status Icons. ......................................................................................................
Getting To Know Your RoadMate. Thank you for purchasing a Magellan RoadMate Dash Cam Navigator, a GPS receiver with Digital Video Recorder (DVR) functionality. This User Manual describes every function you need to know in order to operate your RoadMate. Go to magellangps.com/Vehicle-Navigation for more information about RoadMate products as well as Magellan's complete line of vehicle navigation products. Front View.
Rear View. Micro SD Slot (DVR Recording) Power Button Camera Lens Audio Out MicroSD Slot (diagnostics) USB Connector, Power Input Reset Button Status Icons. Current Time Battery Level Wi-Fi Status Traffic Status* *only available on select models.
Setting Up Your RoadMate. Mounting Your RoadMate In Your Vehicle. Never mount your RoadMate where the driver's field of vision is blocked. GPS reception can be impacted if your windshield is tinted with a reflective coating, In this case, mount your RoadMate in a clear area (usually just beneath the rear-view mirror). Observe all local laws and regulations regarding the mounting of your device on the windshield.
Setting Up Your RoadMate. Connecting To Wi-Fi. For the best experience while getting started. make sure you have a good Wi-Fi signal: from the Map screen > tap Network. 1. Tap 2. Scan for nearby Wi-Fi networks until you locate a network. 3. Tap on a Wi-Fi network. 4. Enter the Wi-Fi network password (if applicable) > tap Connect. Powering Your RoadMate. 1. Connect your RoadMate to AC to Vehicle Power Adapter (VPA) or wall adapter. 2.
5. Tap Create a New ID. 5a. If you already have a Magellan account, tap Log-in with Existing ID > enter . your account details > tap 5b. To register later, tap > tap Information > tap Product Registration. Note: You cannot download map or software updates until you log in or register. . 6. Enter your account details > tap 7. Tap to calibrate LDWS and FCWS.* Note: If you aren’t in a vehicle, you can calibrate LDWS and FCWS later.
Set Up LDWS and FCWS. Lane Departure Warning System (LDWS) warns you when you’re drifting out of your lane based on highway or road lines. Forward Collision Warning System (FCWS) warns you when you’re too close to cars ahead of you. Note: Because of the nature of these functions, they may function abnormally during times of low visibility, including at night. Always drive with caution and be aware of your surroundings. To calibrate the LDWS and FCWS: 1. Tap from the Map screen. . 2. Tap 3.
To set alert sounds for LDWS and FCWS: 1. Tap from the Map screen. . 2. Tap 3. Tap Lane Departure Warning System (LDWS) or Forward Collision Warning System (FCWS). 4. Tap Beep to hear an alert sound, Voice to hear a voice alert, or Off to turn off audible alerts. While driving, you’ll see icons on the screen and hear alerts (based on your alert settings).
Using Your RoadMate. Driving Modes On Your RoadMate. Two main driving modes are available on your RoadMate: Free-Driving Mode: Your position is shown on the map as you drive freely around an area. In this mode, you can search for locations, create a new route, take photos or record videos, browse through your Address Book, and change system settings. Routing: Your position is shown along a highlighted route, and you'll receive visual and audible routing instructions in order to reach your destination.
Searching For And Routing To An Address. To find and route to a nearby location while in Free-Driving Mode: from the Map screen. 1. Tap 2. Tap on a category (e.g. Gas, Coffee Shops, etc.). 2a. Tap on a location in the category list. 2b. Tap 2c. Tap to store the location in My Places OR to view routing details. Note: Tap ... to change Routing Options. 2d. Tap to begin routing to the location.
3. Tap What's Nearby? to see locations around you. 3a. Tap on a location in the Search Results. to store the location in My Places OR 3b. Tap 3c. Tap to view routing details. Note: Tap to change Routing Options. 3d. Tap to begin routing to the location. Routing To A Location. Follow the on-screen map and voice prompts as you drive to the location you entered. You can change routing options while driving or walking to a location. Note: DO NOT operate your RoadMate while driving.
While routing, you can: Tap a Manuever at the top of the screen to open the Turn List. Tap on any turn in the Turn List to view the details of that turn. Note: Tap Tap Tap to stop navigating and return to Free-Driving Mode. to pause the route at any time. Tap Resume to start routing again.
Using the OneTouch Menu. The OneTouch menu gives you quick access to your home address, emergency services, gas stations, and any searched locations you've saved to the OneTouch menu. To access the OneTouch menu: from the Map screen. 1. Tap 2. Tap the Home icon to add your home address. Now, whenever you tap the Home icon, you'll immediately begin receiving routing instructions to your home. 3. Tap the Emergency icon to see the closest emergency locations (e.g. Sheriff's office, Fire Station, Hospital, etc.
Using DVR Recording. Tap from the Map screen to open the device camera. From here, you can: • Tap to begin recording DVR video while you're driving. Tap Stop Recording to end DVR video recording. to capture a photo of the current view from the camera. • Tap • Tap Recording List to view a list of your photos and videos. To edit your recorded photos and videos: 1. Tap from the Map screen. 2. Tap Recording List. 3.
Changing System Settings. Tap Settings from the Map screen to access the Settings menu. General: Set general device preferences. • Screen Brightness: Change brightness level for Day Mode, Night Mode, and Auto Brightness. • Auto Power Off: Change the duration of time of inactivity before your RoadMate powers off (10 mins, 20 mins, and 30 mins). • Disable Auto Power Off: Disable the Auto Power Off function (checked) or enable the function (unchecked).
• Map Display: Set map interface and display preferences. • Map Orientation: 3D, 2D, or 2D North Up. • Night Mode: Auto, On, or Off. • Auto-Zoom on Turns: On (checked) or Off (unchecked). • Lane Assist: On (checked) or Off (unchecked). • Junction View: On (checked) or Off (unchecked). • Live Traffic: On (checked) or Off (unchecked).
• SD Card Storage Information: View how much space each type of video/photo takes up on your SD card. • Format Card: Clears your SD card so that it can be optimized for use with your RoadMate device. This erases all data on the SD card. Information: View product details, legal documentation, support information, and more. • Product Information: View product details, including Serial Number, Software Versions, and more. • Check for Updates: Check for the latest Software and Map Updates.
Using MiVue Manager. MiVue Manager™ allows you to view the videos recorded on your dashcam. Note: Not all features are available for every RoadMate model. Installing MiVue Manager. Download MiVue Manager from support.magellangps.com and follow the on-screen prompts to install it. Make sure to download the correct software version (Windows or Mac) according to your computer's operating system.
Playing recorded files. 1. Remove the memory card from the recorder and access the card on the computer via a card reader. 2. Copy the recording files to your computer for backup and playback.You may also leave the memory card inserted in the MiVue device and connect the device to your computer via a USB cable. 3. Start MiVue Manager on the computer. By default, MiVue Manager shows the calendar and the file list on the right. When a recording file exists you will see the date marked with “ ”.
The tool bar allows you to do the following: 1 2 3 4 5 6 1 Select folder that stores files. 4 Capture/save video image to your computer. 2 Preview/print current image. 5 Open Settings menu.* 3 Save files to your computer. 6 Export and save GPS info as KML format to your computer. 7 7 Upload files to Facebook and YouTube. *Settings menu: • Change Language: Sets the display language of MiVue Manager. • Change Skin: Sets the colour scheme of MiVue Manager.
Warranty. Magellan Limited Warranty All Magellan global positioning system (GPS) receivers are navigation aids, and are not intended to replace other methods of navigation. The purchaser is advised to perform careful position charting and use good judgment. READ THE USER GUIDE CAREFULLY BEFORE USING THE PRODUCT. 1. MAGELLAN WARRANTY (a) MiTAC Digital Corp.
(f) service performed or attempted by anyone other than an authorized Magellan Service Center; (g) any product, components or parts not manufactured by Magellan, (h) that the receiver will be free from any claim for infringement of any patent, trademark, copyright or other proprietary right, including trade secrets (i) any damage due to accident, resulting from inaccurate satellite transmissions.
Need Technical Support? If you need technical support for your Magellan product, go to support.magellangps.com for answers to most questions. If you can’t find a solution there, contact Magellan Technical Support by e-mail at support.us@cs.magellangps.com or call 800-707-9971. Connect with us @MagellanGPS MiTAC Digital Corporation 279 E Arrow Hwy, San Dimas, CA 91773 USA www.magellanGPS.com 112-0119-001 © 2016 MiTAC Digital Corporation.
