User guide

Troubleshooting
MultiView™ II DVI-TX Installation and User Guide 17
Problem Solution
Notes on daisy
chaining
When utilizing a receiver’s RJ45 daisy chain port, the following rules apply:
• If using L/R summed audio, simplex serial, or SPDIF units, a maximum of 12 units may
be daisy changed within the rated cable length of the receiver.
• When using SA units, a maximum of 4 units may be daisy chained within the rated cable
length of the receiver.
• When using SAP units, a maximum of 12 units may be daisy chained within the rated
cable length of the receiver if using standard CAT5/6 or a maximum of 8 units may be
daisy chained within the rated cable length of the receiver if using low-skew cable.
• When daisy chaining, the maximum cable distance is not increased beyond the rated
distance of the receiver used. For example, an AK600 can only daisy chain within 600 ft
of the transmitter. It is possible to daisy chain out of a short range receiver into a longer
range receiver to increase the range. For example, over 600 ft an AK600 can be daisy
chained into an AK1200 which allows for daisy chaining to 1,200 ft.