User guide

Connector Pinouts
MultiView™ II DVI-TX Installation and User Guide 20
Serial port (IOIO) connector pinout (232/SA/SAP versions only):
The DVI-TX’s serial port connector is configured to look like a standard 9-pin “DCE” serial port. Therefore,
in most applications a straight through serial cable or adapter-plug (DB9-Female-to-Male) is used to
connect an external serial device (for example, a PC) to the DVI-TX transmitter.
The DB9-F serial port is only available on DVI-TX-232, -SA and –SAP models.
DVI-TX
(232)
Simplex
DVI-TX
(232)
Duplex
DVI-TX
(SA)
Simplex
DVI-TX
(SA)
Duplex
DVI-TX
(SAP)
Simplex
DVI-TX
(SAP)
Duplex
Pin# 4 wire 9 wire 2 wire 3 wire 2 wire 3 wire
1
- DCD - - - -
2
- RX - RX - RX
3
TX TX TX TX TX TX
4
DTR DTR - - - -
5
Ground Ground Ground Ground Ground Ground
6
- DSR - - - -
7
RTS RTS - - - -
8
- CTS - - - -
9
- RI - - - -
DB9-F Serial Port
Pin #9
Pin #5 Pin #1
Pin #6