User guide
Regulatory Compliance Information
MultiView™ II DVI-TX Installation and User Guide 30
Appendix F Regulatory Compliance Information
FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO FREQUENCY
INTERFERENCE STATEMENTS
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This
device may not cause harmful interference, and 2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his/her own expense.
Canada (ICES-003) notice: This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe A est conforme a la norme NMB-003 du Canada.
EUROPEAN UNION DECLARATION OF CONFORMITY
Warning: This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
Magenta Research (New Milford CT USA) declares under our sole responsibility that the Magenta MultiView
video-extension products to which this declaration relates is in conformity with the following standard(s) or other
normative documents:
EN 55022:2006 + A1:2007 Class A ITE emissions requirements.
EN61000-3-2:2006 Limits for harmonic current emissions (equipment input current up to and including
16A per phase).
EN 61000-3-3:1995/A1:2001/A2:2005 Limitation of voltage fluctuations and flicker on low-voltage supply
systems for equipment with rated current up to and including 16A.
EN55024:2003 Immunity for ITE.
SAFETY WARNING
Connection: Not for direct connection to Telecommunication Network Circuitry (TNV)
Power sources: This equipment should be operated only from the power source indicated on the product.
Disconnect all power sources before servicing.
Servicing: Refer all servicing to qualified service personnel. There are no user-serviceable parts inside.
Slots and openings: If the equipment has slots or holes in the enclosure, these are provided to prevent
overheating of sensitive components inside. These openings must never be blocked by other objects or
equipment.