Setup guide

.
5
1. Specifications
Cable Required: Category 5, 5e, 6 shielded or unshielded twisted pair
Compliance: CE; FCC Class A, IC Class A
Video Support: QVGA, VGA, SVGA, XGA, SXGA, UXGA, RGBHV, RGB,
Composite (NTSC, PAL, SECAM), S-Video, Component Video,
widescreen modes, HDTV modes including 1080p, 1080i, 720p
Resolution and
Refresh Rate: At 2000 ft. (609 m) or less: to 1920x1200
Required Source
Impedance: Video OUT: 75 ohms;
Audio models: Audio OUT (if any): 600 ohms maximum
Required Destination
Impedance: Video IN: 75 ohms;
Audio models: Audio IN (if any): 600 ohms minimum
Audio
Characteristics: Right/Left summed (A option)
XR2000SA/SAP: Full Stereo
Line Level 600 Ohm Unbalanced
Serial
Characteristics: Protocol: Asynchronous; transparent to data format;
data rates to 115 kbps simplex, half-duplex modes
SA/SAP versions are 3 wire, fixed baud rate of 9600
Connectors: (1) 4 pin phoenix, (2) RJ-45, (1) HD15 F; (1) DB9M (model
dependent)
Temperature
Tolerance: Operating: 32 to 104°F (0 to 40°C);
Storage: -4 to +140°F (-20 to +60°C)
Humidity
Tolerance: Up to 80% noncondensing
Enclosure: Steel
Power: +12 VDC; 1.2 A
Consumption: 6 watts maximum
Size: 1.2"H x 5.6"W x 6.2"D (3.0 x 14.2 x 15.7 cm)
Weight: 2.0 lb. (0.9 kg)
CHAPTER 1: Specifications
3