users manual

Connect via Wi-Fi
1. Plug the power cable into your encoder.
The LED indicators will light in rotation as the unit boots. Wait for about 1
minute and the boot up will be done.
2. Tap the Ultra Stream app icon on your phone.
3. Turn on Wi-Fi and Bluetooth on your phone, and make it discoverable to
nearby devices.
4. Tap the Ultra Stream app icon on your phone, then the app will search
for devices automatically.
Configuration
Network
There are 3 ways for the Ultra Stream app to discover the encoders, via Ethernet, Wi-Fi and Bluetooth. If there are multiple ways to detect the unit simultaneously, the
priority is: Ethernet > Wi-Fi > Bluetooth.
To ensure smooth live streaming experience, connecting to a wired
Ethernet network is recommended.

Turn on Location Services and authorize to the app for Android 6.0
and above.
■
Your phone and encoder must be connected to the same Wi-Fi
network.
■
Your phone and encoder must be close to each other (less than 10m
apart).
■
9