` REFRIGERATOR INSTRUCTION MANUAL Model No.: MCBR980W z Before use, please read this manual carefully.
Before Putting Into Use z Before connecting the appliance to the power supply, let it stand for about 2 hours, which will reduce a possibility of malfunctions in the cooling system due to transport handling. z Clean the appliance, and be thorough, especially in the interior (See “HOW TO CLEAN”). z In case the interior accessories are not correctly placed, rearrange them as described in chapter “NAME OF THE PARTS”. Instructions for Use These instructions for use are intended for the user.
Important DANGER: Risk of child entrapment. Before you throw away your old refrigerator or freezer: z Take off the doors. z Leave the shelves in place so that children may not easily climb inside. z The appliance must be correctly connected to the power supply. (See: “HOW TO INSTALL”). z Do not touch the cooled surfaces while the appliance operates, especially not with wet hands, because the skin may stick to the cold surfaces.
NAMES OF THE PARTS Model No.
HOW TO OPERATE Starting Your New Refrigerator 1. Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth, the interior with a clean moist cloth. 2. Insert the power supply cord into the socket. 3. Turn the thermostat dial to “7”. Close the door and let the refrigerator operate for 15-20 minutes. Temperature Control coldest setting. To control the internal temperature, adjust the thermostat dial. “1” is the warmest setting. “7” is the coldest.
HOW TO CLEAN Cleaners: Never use harsh, abrasive cleaners, heavy-duty cleaners, or solvents on any surface. Exterior: Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains and for periodic waxing, use silicon wax. Freezer: When refrigerator needs defrosting push defrost button. Do not use sharp instruments to scrap off ice/frost. Refrigeration Section: Wash shelves and other removable parts in warm sudsy water, rinse and dry.
WHAT TO DO … When the fridge is not in use for a prolonged period: z Remove the power plug from the power point. z Remove all contents from the fridge. z Dry the interior and leave the door open for a few days. When you wish to move the fridge: z Secure all movable parts and contents. (Package them separately if necessary.) z Transport the fridge only in an upright position. In any other position you may damage the compressor. Before calling service, please follow the checklist below.
CHANGING THE REVERSIBLE DOOR CAUTION: To avoid personal injury to yourself and/or property, we recommend someone assist you during the door reversal process. 1. To access the lower hinge assembly, tilt back the refrigerator cabinet or lay the refrigerator on its back. (Fig. C) 2. Remote both leveling legs located at the front of the cabinet. 3. Remove the screws holding the lower hinge assembly to the cabinet. 4. Remove the main door assembly from the refrigerator cabinet.
Limited Warranty MC Sales & Marketing Inc.
