COUNTER TOP ICE MAKER INSTRUCTION MANUAL Model No.: MCIM30SST To ensure proper use of this appliance and your safety, please read the following instructions completely before operating this appliance.
TABLE OF CONTENTS BEFORE PUTTING INTO USE ………………………………………………………………. 2 SPECIFICATIONS ……………………………………………………………………………… 2 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY TIPS …………………………………………………………….…….. 3 NAME OF THE PARTS …………………………………………………………………………4 OPERATING PROCEDURES & MAINTENANCE UNPACKING YOUR ICE MAKER …..…………………………………………………….…. 5 CONNECTING YOUR ICE MAKER ………………………………………………….……… 5 HOW TO CLEAN ………………………………………………………………………………. 6 CARE AND MAINTENANCE ……………………………..
BEFORE PUTTING INTO USE Before connecting the appliance to the power supply, let the unit stand upright for 4 hours, which will reduce the possibility of the cooling system malfunctioning due to improper handling. Clean your unit thoroughly before putting into use. (See “How to Clean”) Use the parts diagram on page 4 to insure proper positioning of internal components. SPECIFICATIONS Product Description Stainless Steel Counter top Ice Maker Model No.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY TIPS When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons or property. Read all instructions before using any appliance. Do not operate this or any other appliance with a damaged cord. Connect to properly polarized outlets only. No other appliance should be plugged into the same outlet. Be sure that the plug is fully inserted into the receptacle.
NAME OF THE PARTS 1. Lid: 2. Inner Liner 3. Ice basket 4. Control Panel: 5. Ice shovel 6. Ice Sensor 7 Water Drain Cap: With a transparent window to allow interior visibility. Easy to use ,visible functions and 1-touch display setting. A) Select ice cube size B) Start ice making cycle C) Stop ice making cycle For draining water from water reservoir.
OPERATING PROCEDURES & MAINTENANCE UNPACKING YOUR ICE MAKER 1. Remove all exterior and interior packaging. Check that ice basket and ice scoop is included. If any part or accessory is missing, please contact our customer service dept at 888-775-0202. 2. Clean the interior with lukewarm water and a soft cloth. Remove the ice basket and wash it in warm water. 3. Find a location for your ice maker that is protected from direct sunlight and other sources of heat (i.e.: stove, furnace, radiator).
HOW TO CLEAN Remove the ice basket. 1. Turn the drain cap counter-clockwise to drain out the . water 2. Clean the interior with diluted detergent, warm water and a soft cloth. 3. The outside of the ice maker should be cleaned regularly with a mild detergent solution and warm water. 4. Dry the interior and exterior with a soft cloth. 5. Close the drain cap. 6. When the machine is not in use, open water drain cap to drain water completely from water reservoir.
USING YOUR ICE MAKER 1. Clean your ice maker thoroughly. 2. Open the lid, remove the ice basket and pour normal tap water into tank. Keep water level below the bottom of the ice basket. 3. Plug in the unit and the medium ice cubes indicator light will blink. 4. Press “Start” on the control panel to begin the ice making cycle. The medium ice cube indicator light will light. 5. Select the size of the ice cube by pressing the “Select” button.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Water is low. Fill the water storage tank with water, the ice maker will start to work automatically. “Ice” indicator is on. Ice basket is full. Remove ice from ice basket. “Add water” and “Ice” indicator are both blinking. Ice shovel is stuck. Check if ice shovel is blocked by ice. If yes, please take out the ice cubes and restart. “Add water” indicator is on. Stop the ice maker, and restart Ice cubes stick together.
Counter Top Ice Maker Warranty MC Appliance Corp. warrants each new Ice Maker to be free from defects in material and workmanship and agrees to remedy any such defect or to furnish a new part(s) (at the company’s option) for any part(s) of the unit that has failed during the warranty period. Parts and labor expenses are covered on this unit for a period of one year after the date of purchase. In addition, MC Appliance Corp.
