Use and Care Manual

OPERATING INSTRUCTIONS

CONTROL

PANEL (FOR MCSCWD27W5/MCSCWD27S5/MCSCWD27G5 ONLY)

a. On/Off: Press [On/Off] to turn the unit ON. Press the button again to turn the unit OFF.

NOTE: If the washer is programmed for a wash cycle and is not started within 10 minutes, the cycle will be

cancelled and the unit will automatically turn OFF.

b. Start/Pause: Press [Start/Pause] to start a wash cycle. Press [Start/Pause] again to pause the cycle when

the washer is running. Press [Start/Pause] once more to resume. To add a garment after the wash cycle has

started, push this button for 3 seconds before the drum has filled with water. This can only be done in the

beginning of the cycle before the water reached the bottom of the door. Wait for the drum to stop and the

door to unlock, then add item(s). Close door and press [Start/Pause] to continue washing.

c. Wash Cycles

1. My Cycle: Select this option to save a commonly used washing program as a preset.

• To program, select the settings you wish to use, and then press and hold [Spin] for 3 seconds to save.

2. Quick Wash: Select this option to wash small loads of clothing that are not very dirty quickl

3. Delicates: Select this option for delicate fabrics such as dress shirts, nylons, etc.

• Wash cycle operates at a lower temperature.

4. Wool: Only use this option to wash wool clothing articles labeled “Machine Washable”.

• Proper detergent and water temperature must be selected for wool textiles.

• Lower spin speed and less agitation

5. Baby Wear: For washing infant clothing

6. Sanitary: Uses hot water to allow enzymes in detergent to work more efficiently for hard to clean or

heavily soiled items.

7. Normal/Cotton: Select this option for regularly used cottons and fabrics.

• Extended wash cycle with stronger intensity

• Recommended fabrics: cotton, linens, bed sheets, t-shirts, towels, jeans, etc.

• Dry cycle can be added.

Figure 13

Press 3 sec. to set My Cycle

e f

l m n

h i j d c b