Use and Care Manual

CARE AND MAINTENANCE
Before doing any maintenance, be sure to remove the power plug from the outlet and close the tap.
WARNING:
DO NOT use solvents to clean the unit. The washing machine can be damaged, or toxic gasses may be
produced.
NEVER spray water on the washing machine to clean it.
DO NOT use detergents that contain PCMX to clean the washing machine.
Certain internal parts are intentionally not grounded and may present a risk of electric shock only during
servicing. Service Personnel – DO NOT contact the following parts while the appliance is energized: Drain
Pump, Door Lock, Drying Heater (Combo), Fan Motor (Combo).
CLEANING AND MAINTENANCE OF WASHING MACHINE CABINET
Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with
diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use a cloth to wipe it off
immediately. DO NOT allow sharp items to strike the cabinet.
NOTE: DO NOT use formic acid and its diluted solvents or equivalent.
CLEANING THE INTERNAL DRUM
Any rust left inside the drum by the metal articles should be cleaned out immediately with chlorine-free detergents.
DO NOT use steel wool.
CLEAN DETERGENT BOX
1. Open Detergent box.
2. Press down the arrow and slide out assembly. (Figure 17-1)
3. Lift the clip and remove softener cover and wash all sections with water. (Figure 17-2)
4. Replace the softener cover and push the drawer back into position. (Figure 17-3)
Figure 17
Figure 17-1 Figure 17-2 Figure 17-3
CLEAN INLET FILTER
Inlet filter maybe need to be cleaned if there is insufficient or no water in when the tap is opened.
To clean the filter: