MEAT GRINDER INSTRUCTION MANUAL Model: MCSMG500W THANK YOU FOR PURCHASING A MAGIC CHEF PRODUCT. PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT.
CONTENTS SAFETY INSTRUCTIONS …………………………………..…………….……………………………………………………… 3 IMPORTANT SAFEGUARDS ………………….…………………………………………………………………………….… 4 PARTS AND FEATURES …..........…………………………………………………………………….……………………... 6 BEFORE USE ………………………….…………………………………………………………………………………………….. 7 OPERATING INSTRUCTIONS ….…………………………………………………………………………..…………………. 8 CARE AND MAINTENANCE …..………………………….………………………………………………………………... 10 WARRANTY ………………………….…………………………………………………………………………………………...
What You Need to Know About Safety Instructions Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised when installing, maintaining, or operating appliance. Always contact your dealer, distributor, service agent or manufacturer about problems or conditions you do not understand.
IMPORTANT SAFEGUARDS When using electrical appliances, basic precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING. 2. Check if the voltage indicated on the appliance is compatible to the electrical outlet voltage prior to connecting this appliance. 3. Do not use any accessories or parts that are not authorized by the manufacturer. Your Warranty will be void if such accessories or parts are used. 4. Do not use this appliance if any part of it is damaged. 5.
Notes on the Cord Plug This appliance has a polarized plug. To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only in one way. If the plug does not fit fully into an electrical outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. A. A shorter power-supply cord (or detached power-supply cord) is provided to reduce the risk resulting from being entangled in or tripping over a longer cord. B.
PARTS AND FEATURES 1. 2. 3. 4. 5. 6. 7. 8. Body ON/OFF/REVERSE Switch Direction Switch Fasten Button Tube Inlet Food Pusher Hopper Plate Feeder head 9. Feed Screw 10. Cutting Blade 11. Cutting Plate (Fine) 12. Cutting Plate (Medium) 13. Cutting Plate (Coarse) 14. Screw Ring 15. Sausage Horn 16.
BEFORE USE NOTE: This appliance is equipped with a thermostat system which will detect overheating and automatically shut off the power supply to the appliance. If you appliance suddenly stops operating: 1. Press the switch button to OFF. 2. Pull the main plug out of the electrical outlet. 3. Let the Meat Grinder cool down for 60 minutes. 4. Resume using the Meat Grinder Please contact your dealer of an authorized service center if the unit frequently shuts down or stops operating. 1.
OPERATING INSTRUCTIONS Assembling NOTE: Always place the unit on a firm, level, and secure place. The air passage at the bottom and the side of the motor housing should be kept free and clear. 1. Press the fasten button and hold the head to insert it into the inlet; the head must be slanted. 2. Then, rotate the feeder head counterclockwise so that the head is secured tightly. 3. Place the feed screw into the head with long end first; turn slightly to feed the screw until it is set into the housing. 4.
Mincing 1. Insert the feed screw (plastic end first) into the housing. Place the cutter unit on the feed screw with cutting edges the front. Place a medium or coarse grinding disc on the feed screw. Make sure the notch of the grinding disc fits on the projections of the mincer head. Turn the screw ring in the direction of the arrow on the housing until it is securely fastened. 2. Place the tray on the upright part of the feeder head. 3. Cut meat into strips that are 4 inches long and 1 inch thick.
CARE AND MAINTENANCE Meat left behind in the feeder head may be removed from the inside of the appliance by passing a slice of bread through. 1. Before cleaning the appliance, switch off and unplug from the electrical outlet. 2. Press the release button and turn the whole cutter housing in the direction of the arrow. Remove the pusher and the tray. (fig. 12 + 13) 3. Unscrew the screw ring and remove all parts of the cutter housing. WARNING: DO NOT CLEAN THE PARTS IN DISHWASHER. 4.
LIMITED WARRANTY Unless otherwise prohibited, MC Appliance Corporation warrants each MEAT GRINDER MSCMG500W to be free from defects in material and workmanship and agrees to remedy any such defect or to furnish a new part(s) (at the company’s option) of the unit that fails during the warranty period. A copy of the dated sales receipt or invoice is required to receive warranty service or a refund. This warranty covers an appliance in use within the continental United States, Puerto Rico and Hawaii.
