Use and Care Manual

Read this assembly manual carefully, and verify that you have all the parts listed before you begin.
Keep your assembly manual for future reference.
Move this stand gently with 2 persons.
Protect finishes by placing furniture pieces on a soft carpeted surface during assembly.
Do not place very hot/cold objects on top of any surface. Always use a coaster or mat. Never leave
liquids on the surface: Clean immediately with a mild soap and a damp cloth. Never use scouring
powder based cleanser. Don't touch the glass surface with a hard/acute object it may cause the glass
to shatter.
DO NOT ASSUME CHILD SAFETY WITH ANY PIECE OF FURNITURE!
Do not allow children to climb on furniture. Improper use can cause death or serious injury. If you are
placing a TV on top use safety straps on your TV to prevent the risk of a toppling television. Furniture
straps fastened to a wall can also be used to help ensure safety.
Damaged parts or furniture put together incorrectly can lead to serious injuries. Make sure to follow
instructions correctly.
Make Sure the small hole on
Part 7 face backward.
1
15
1 x1 3 x2
15 x2
6 x1
3
6
3
16 x2
16
2
2
x1
4
x2
7
x1
4
7
4
1 x1 2 x2
4 x2
3 x2
5 x2
6 x1
8 x1
7 x1
9 x1 10 x1
12 x111 x2 13 x2 14 x2 15 x2
A B D
C
(Rubber washer )
A1 X2
C1 X2 C2 X2
C3 X2
Screws for TV
S
E
E1 X2
16 x2
Tools Requred(Not included)
17 x2
(13#)
(5mm)
B1 X1 B2 X1
B3 X1
(17#)
M6x470
M8x465
M10x675
Make Sure part 2 the matt surface
face upward during assembling.
15
D1 x2 D2 x2
AT9817
F
F1 X2
1 2